Possibly Related Threads…

***baralic*** · 07-07-2014, 06:44 AM,

Hi ppl

Here are some manuals, how to repair Bosch VP 44 Diesel pump...

Pls hit the thanks button , if my thread is useful for you ..... bow

***nizar-maoukil*** · (This post was last modified: 07-07-2014, 12:23 PM by nizar-maoukil.)

Hi To All
i Add this video for how to repair the vp44 diesel pump

Oops here is
sorry

***Ddnc*** · 27-10-2015, 00:29 AM,

Can someone please tell me what interface is used to diagnose pump by k-line and port settings?
Tried elm327 but it doesn't connect with vp44_eng.exe
Also have focom and vagcom but haven´t try it yet.
Ford Focus is the car and it doesn´t start but mosfet is ok.
Does this pump have shut off solenoid? Asking this because it doesn´t have pin 5.
Thanks

***maki1*** · 27-10-2015, 03:11 AM,

K line interface work ok..and op-com same work...need connect +12v.gnd and k line.

***Jartsa*** · 27-10-2015, 06:47 AM,

So the pump can be diagnosed on the table? with normal usb to obd k-dcan cable?

***doktorabg*** · 27-10-2015, 07:34 AM,

(27-10-2015, 06:47 AM)Jartsa Wrote: So the pump can be diagnosed on the table? with normal usb to obd k-dcan cable?

Yes, with any normal kkl cable.

***cubica*** · 27-10-2015, 16:42 PM,

KKL interface any type will work on the bench within Deniss Soft VP44_eng.exe, when connect you'll see somthing like this:
YS6Q9A543RC
C063_2.V61
C062_0.P64
2 469 947 019
0 281 001 827

after reading DTC:
52 Angle sensor/IWZ system. (32)
59 BIP Fault (Begin of Injection Point) (32)

and after erase DTC:
0 Error

If driver has not visible mechanical damages, also messuring is ok, it doesn't mean it is ok. Should be changed, anyway.

rgds,

cuby

25-11-2015, 13:48 PM,

VP44 Test and Repair instructions

***mattydr67*** · 26-11-2015, 06:00 AM,

(27-10-2015, 00:29 AM)Ddnc Wrote: Can someone please tell me what interface is used to diagnose pump by k-line and port settings?
Tried elm327 but it doesn't connect with vp44_eng.exe
Also have focom and vagcom but haven´t try it yet.
Ford Focus is the car and it doesn´t start but mosfet is ok.
Does this pump have shut off solenoid? Asking this because it doesn´t have pin 5.
Thanks

You can use any Vag KKL with vp44_en.exe
You can use Focom tool with Focom software
You an use Op-Com tool with Op.Com software
You an use Bosch KTS
All you need is to use the apater to connect directlly to the pump ecu and power supply
I used KKL, Op-Com and Bosch KTS
Good luck

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Help… Opel/Fiat MJD repair	SamRib	2	170	05-02-2024, 16:24 PM Last Post: SamRib
	Toyota Highlander 2015 Repair manual	Arod1987	2	561	26-12-2023, 10:48 AM Last Post: ToolSet
	2015 porsche macan repair manual	hicazkar	1	575	11-10-2023, 07:50 AM Last Post: Albert-Kreis
	Peugot 504 Kugelfischer injection repair manual	arnowahn	0	291	06-08-2023, 04:34 AM Last Post: arnowahn
	Search for ATE MK60EC1 MK61 ABS Complete REPAIR SOLUTION	Chri1911	3	595	12-07-2023, 21:15 PM Last Post: Chri1911
	HAYNES - Data Book Collection (Repair Manuals ALL your car)	hipro60	1	1,253	29-05-2023, 01:13 AM Last Post: iturboh
	Needed! Toyota Land Cruiser repair manual 2009-2013	Riksaw	1	728	27-04-2023, 15:25 PM Last Post: sinusadasivan
	-=Repair Manuals ALL=-	hipro60	0	1,059	26-04-2023, 16:40 PM Last Post: hipro60
	Need VAG DQ400 0DD mechatronic repair manual	hartar197	0	403	09-03-2023, 20:21 PM Last Post: hartar197
	F10 Repair Manual	dutchmen72	0	467	05-02-2023, 19:31 PM Last Post: dutchmen72

Contact Us