Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

NISSAN CVT re0f06a help!!!!
19-10-2015, 11:14 AM,
Post: #1
UNissan  NISSAN CVT re0f06a help!!!!
I have a NISSAN with CVT (re0f06a).

And there are two DTC codes here. p0746 & p0868

And i checked the ATP oil temperature, it's about 132 °C (269.6 °F).

What's problem with that!!!! Can somebody help me ? Please~~
THANK you.
Quote this message in a reply
01-11-2015, 11:51 AM,
Post: #2
RE: NISSAN CVT re0f06a help!!!!
These two codes looks like they come together i suspect the first fault code p0746 pressure control solenoid performance or stuck on. is wear i would start goggling and checking the internet for a result . hope this put you in the right direction
Quote this message in a reply
01-11-2015, 12:49 PM, (This post was last modified: 01-11-2015, 12:53 PM by robby12.)
Post: #3
RE: NISSAN CVT re0f06a help!!!!
(19-10-2015, 11:14 AM)st860742003 Wrote:  I have a NISSAN with CVT (re0f06a).

And there are two DTC codes here. p0746 & p0868

And i checked the ATP oil temperature, it's about 132 °C (269.6 °F).

What's problem with that!!!! Can somebody help me ? Please~~
THANK you.

see if this can help.

see if this can help
Quote this message in a reply
[+] 1 user says Thank You to robby12 for this post
11-11-2015, 22:20 PM,
Post: #4
RE: NISSAN CVT re0f06a help!!!!
DTC P0746 PRESSURE CONTROL SOLENOID A PERFORMANCE (LINE PRESSURE SOLENOID VALVE)

Description
The pressure control solenoid valve A (line pressure solenoid valve) regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the TCM.

Possible Causes:
_ Line pressure control system
_ Output speed sensor (Secondary speed sensor)
_ Input speed sensor (Primary speed sensor)

DTC P0868 SECONDARY PRESSURE DOWN

Description
The pressure control solenoid valve B (secondary pressure solenoid valve) regulates the secondary pressure to suit the driving condition in response to a signal sent from the TCM.

Possible Causes:
_ Harness or connectors (Solenoid circuit is open or shorted.)
_ Pressure control solenoid valve B (Secondary pressure solenoid valve) system
_ Transmission fluid pressure sensor A (Secondary pressure sensor)
_ Line pressure control system
Hope that works.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  nissan micra k12 wont start coder 0 18 14-04-2024, 15:29 PM
Last Post: coder
UNissan NISSAN CONSULT3 PASSTHRU DRIVERS VAS5054 ritadj 0 83 10-04-2024, 22:06 PM
Last Post: ritadj
  Nissan micra - virgin dump for EPS bboctavian 0 39 05-04-2024, 11:44 AM
Last Post: bboctavian
  2015 Nissan Rogue missing BCM koziol 0 37 05-04-2024, 00:59 AM
Last Post: koziol
UInfiniti Looking for Nissan Consult j2534 drovid 5 423 16-03-2024, 15:01 PM
Last Post: domelec
  Nissan Qashqai 2019 need cooding sorin.henea 1 109 04-03-2024, 09:05 AM
Last Post: xxmatixx
  2009 Nissan Sentra Calibration file koziol 0 53 26-02-2024, 16:35 PM
Last Post: koziol
  Nissan Qashqai no cummunicate with ecm , many fault u1000 TKservice 0 57 23-02-2024, 06:59 AM
Last Post: TKservice
UNissan Glow plugs values Nissan x-trail t32 dci bad start AlexM3F80 3 123 23-02-2024, 06:25 AM
Last Post: AlexM3F80
  nissan pickup 2005 new key davito1 0 34 22-02-2024, 17:08 PM
Last Post: davito1

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content