[Dash_Burner]

Hi all

Has anyone got experience for immo off of this ecu ??? Inside has 95160 chip and ori dump is in attachment. Do i have to do somethink else for this job? For example disconect immo box or remove key antenna or somethink ? I tried with immo killer but i see and compare original dump with the modified and see that many thinks are missing from the modified. I believe thet its wrong dump and i will not test it.

I post both files to see and compare.

[tummas]

Try this and let me know

[Dash_Burner]

Try this and let me know

I will test tomorrow and let you know. Does this car has immo box or do i have to cut the immo antenna cable ? I dont know the procedure.

[tronico]

Panda hasn't immo box. It's in the BCM, so You can't detach. Immo antenna could detach by a connector but I've never need to did this by any Marelli ECU (although I've never made by 4AF.SF)

[tummas]

Is a panda 169? do not touch anything that I write the file attachment in the eeprom 95160 and put in motion

[Dash_Burner]

Is a panda 169? do not touch anything that I write the file attachment in the eeprom 95160 and put in motion

Finally your dump worked. I tested in 2 cars and all went fine.

[tummas]

I'm glad you've solved

[Mistermarc]

Is a panda 169? do not touch anything that I write the file attachment in the eeprom 95160 and put in motion

Hi Sir, can i please have your attachment solution again?
Thank you