Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-P 3.57.0.400
01-11-2015, 08:22 AM,
Post: #91
RE: ISTA-P 3.57.0.400
(01-11-2015, 00:48 AM)Studie Wrote:  The logs are not text files how do I open them to read?

They must have extension .7zip.log

The file format is as follows.
YYYYMMDD_HHMISS_3.57.0.400_4.1.1_InstallerLogs.7zip.log

You must change the extension .7zip.log by .zip (eg)
Then, you can open the file with WinZip

A greeting
ATC

If any of my posts or current one helps then don't forget to press thanks and add a reputation. thumbsup
Quote this message in a reply
[+] 2 users say Thank You to ATC for this post
01-11-2015, 13:21 PM,
Post: #92
RE: ISTA-P 3.57.0.400
(01-11-2015, 00:48 AM)Studie Wrote:  
(31-10-2015, 21:16 PM)ruben_17non Wrote:  
(31-10-2015, 19:49 PM)Studie Wrote:  
(31-10-2015, 19:33 PM)ruben_17non Wrote:  
(31-10-2015, 19:10 PM)Studie Wrote:  Having trouble installing on top of my existing install.

I already un-installed the older ista-p, and tried to install on top but no luck.

Could anyone advise how to fix this problem? Much thanks.

Check log. you have space in HDD?

Yes I am using a 750GB HDD. Where is the log saved to?

Thanks

If you have ISTAP V56 the best way is remove.
Check log in:
C:\ProgramData\BMW\ISPI\Logs\TRIC\ISTA-P


The logs are not text files how do I open them to read?

Unpack with winrar or other, after this open files with TExt editor
and search error in final of text

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
[+] 2 users say Thank You to ruben_17non for this post
01-11-2015, 16:33 PM,
Post: #93
RE: ISTA-P 3.57.0.400
(31-10-2015, 19:10 PM)Studie Wrote:  Having trouble installing on top of my existing install.

I already un-installed the older ista-p, and tried to install on top but no luck.

Could anyone advise how to fix this problem? Much thanks.

I ran into this problem attempting an upgrade from ISTA-P 3.56.3.002. For that version, I wasn't given an installer, so I had copied the bits directly to C:\ISTA-P. Without cleaning anything up first, I attempted to run the MSI and saw this same error.

I don't think it's a HDD space issue or memory issue as those checks are much earlier in the installer. And there's a specific message in the logs about failing the hardware check in this case.

I didn't attempt to resolve the issue in my case, as this was running ISTA-P in a VM, so I reverted to a checkpoint before ISTA-P was copied and run. The installer worked fine in a clean VM.

You can try running the MSI with more logging info by using this command:
"msiexec /l* ista-p.log /i BMW_ISPI_ISTA-P_SYS_3.57.0.400.msi"

Perhaps this will point to why the installer is stopping.
Quote this message in a reply
01-11-2015, 17:21 PM,
Post: #94
RE: ISTA-P 3.57.0.400
(01-11-2015, 13:21 PM)ruben_17non Wrote:  
(01-11-2015, 00:48 AM)Studie Wrote:  
(31-10-2015, 21:16 PM)ruben_17non Wrote:  
(31-10-2015, 19:49 PM)Studie Wrote:  
(31-10-2015, 19:33 PM)ruben_17non Wrote:  Check log. you have space in HDD?

Yes I am using a 750GB HDD. Where is the log saved to?

Thanks

If you have ISTAP V56 the best way is remove.
Check log in:
C:\ProgramData\BMW\ISPI\Logs\TRIC\ISTA-P


The logs are not text files how do I open them to read?

Unpack with winrar or other, after this open files with TExt editor
and search error in final of text

I was only able to find an error in the LaunchInstallation.log text.

PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Datei existiert weder auf Distributionsmedium noch im Zielverzeichnis ErrorFileNotFoundInSourceOrTarget
31/10/2015-8:57 PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Fehler bei Ausfuehrung ErrorFailedExecute
31/10/2015-8:57 PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Installation fehlgeschlagen ErrorFailedInstallation
31/10/2015-8:57 PM ERROR: Installationsvorgang fehlgeschlagen (ErrorCode: ErrorCode:Invalid #-2)
31/10/2015-8:57 PM ERROR: Setzen des Installationsmodus fehlgeschlagen. Breche Installation ab.
31/10/2015-8:57 PM ERROR: Konfigurieren und Starten des IFS-Installers fehlgeschlagen.
31/10/2015-8:57 PM ERROR: CustomAction 'LaunchInstallation' fehlgeschlagen.

And the PreinstallCleanup.log


31/10/2015-8:55 PM ERROR: Janitor.WipeFingerprints(): Unable to delete fingerprint directory since it doesnt exist
Quote this message in a reply
03-11-2015, 21:21 PM,
Post: #95
RE: ISTA-P 3.57.0.400
I use ISTA / P with original ICOM and in the new ISTA / P is not displayed ICOM. Does anyone here have also found this problem and have a solution?
Quote this message in a reply
03-11-2015, 21:46 PM,
Post: #96
RE: ISTA-P 3.57.0.400
(03-11-2015, 21:21 PM)hojo29 Wrote:  I use ISTA / P with original ICOM and in the new ISTA / P is not displayed ICOM. Does anyone here have also found this problem and have a solution?

Press small button on the top of ISTA - connection manager, it is look like a small book. ISTA should adapt ICOM which own requirements and update firmware if necessary. Did you turn off all firewalls and antyvirus softwares ?
Quote this message in a reply
03-11-2015, 21:48 PM,
Post: #97
RE: ISTA-P 3.57.0.400
Firmware update necessary

Hit Thanks and Reputation button if this post helped you.
Quote this message in a reply
03-11-2015, 22:14 PM,
Post: #98
RE: ISTA-P 3.57.0.400
Ok will test it again tomorrow.
ICOM firmware is already installed new
Quote this message in a reply
04-11-2015, 20:55 PM,
Post: #99
RE: ISTA-P 3.57.0.400
What is the latest icom firmware?
Quote this message in a reply
04-11-2015, 21:52 PM,
Post: #100
RE: ISTA-P 3.57.0.400
03-14-03
ICOM-BootImage-01-25-02
ICOM-ApplicationImage-01-40-05
Quote this message in a reply
[+] 2 users say Thank You to masa52 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA+ Licenserequest 4.45.30 B O S S 45 1,392 36 minutes ago
Last Post: 2013m5
  ista 4.46 Standalone kiranabc 86 10,803 6 hours ago
Last Post: kiranabc
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,711 669,502 Yesterday, 14:11 PM
Last Post: Sedoy
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 98 11,765 Yesterday, 09:48 AM
Last Post: egyclick
  ISTA 4.47 test plan not available on M3 bmwm3power 3 135 26-04-2024, 20:15 PM
Last Post: 2013m5
XZBMW ISTA+ 4.47.1x Install Files - MEGA shawnsheridan 12 1,556 26-04-2024, 15:36 PM
Last Post: shawnsheridan
XZBMW ISTA 4.47.1x I-LEVEL+OVERVIEW AutoExe3219 0 262 24-04-2024, 22:52 PM
Last Post: AutoExe3219
XZBMW [MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed hashtagmaster 61 18,427 21-04-2024, 22:17 PM
Last Post: grizzle
XZBMW ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40 maksymw 3 990 21-04-2024, 12:02 PM
Last Post: matigdy
XZBMW Update ISTA 4.39.20 SQLiteDBs Italian Language diman64 10 1,004 20-04-2024, 11:20 AM
Last Post: elettra19

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content