Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to synchronize used EIS to a MB C-class ?
24-10-2015, 22:26 PM,
Post: #1
|
|||
|
|||
How to synchronize used EIS to a MB C-class ?
Hello
How to synchronize used EIS to a MB C-class ??? W203 . I need to know the procedure how to learn a used EIS to this car. I know that if I moved the two ICs from old to new it will work . I need to know how can I program the new EIS without any help from the old EIS . If I renew the ECU , what is the next step I have to do ??? Regards . |
|||
24-10-2015, 22:31 PM,
Post: #2
|
|||
|
|||
RE: How to synchronize used EIS to a MB C-class ???
If you have AK500+ can reads mcu of old EIS and make key
also have to renew ESL to be able to use for old EIS thank you. best regards. |
|||
24-10-2015, 22:36 PM,
Post: #3
|
|||
|
|||
RE: How to synchronize used EIS to a MB C-class ???
|
|||
24-10-2015, 23:08 PM,
Post: #4
|
|||
|
|||
RE: How to synchronize used EIS to a MB C-class ???
Yes friend
sorry friend If you have AK500+ can reads mcu of EIS and make key also have to renew ESL to be able to use for old EIS thank you. best regards. |
|||
25-10-2015, 13:55 PM,
Post: #5
|
|||
|
|||
RE: How to synchronize used EIS to a MB C-class ???
just follow these steps mate !
1: Read mcu where Stored key data and save ori dump 2: calc non used keys by skc or use my Thread Here By Posting ori dump Here (Click Me) 3: read mcu hc05 from used esl (using xprog. upa . or others programmers) then renew it by fill all lines FF FF... except last line 4: renew ecu that's all BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
25-10-2015, 18:17 PM,
Post: #6
|
|||
|
|||
RE: How to synchronize used EIS to a MB C-class ???
Thanks for all
I did not have enough knowledge to do this job thank you Regards |
|||
08-04-2016, 08:23 AM,
Post: #7
|
|||
|
|||
RE: How to synchronize used EIS to a MB C-class ?
So after you renew the esl and the ecu you just plug them back to the car
And the car start ? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content