[Bimmer540]

Which K+DCAN cable works best with Rheingold / Ista-D
and where can I buy it.

I have this cable and it only works with Inpa:

[Twoone]

Which K+DCAN cable works best with Rheingold / Ista-D
and where can I buy it.

Hello,

If it work with INPA it should work with Rheingold. Latency in com setting is "1"?

I Use this one in atatchment. Is recomended at many forums but is not the cheapest one.

Pin 7 en 8 not connected. So you can use also for cars after 3-2007

For older cars with also k-line on pin 8 an adapter is included.

Ofcourse you can modify and remove pin 8 or build in switch so that it is compatible with most cars.
I used the same as yours also (15 dollar) and worked like charm.

Link.Txt
File Type:
Downloaded:	114 times
Size:	44 bytes

[Bimmer540]

Yes, Latency in com setting is "1"

[gfriedrichi]

You also need to config ista/d

[Enabled]

It depends which car you have.

K+DCAN cable isn't the best for some older cars, unless you want to bridge pins 7&8 and disable DCAN at the cable.


Also, the green mainboard K+DCAN cables have been known to be better than the white board ones.

[atom256]

Hi guys
yes green pcb cables work great also this time i buy 6 green pcb cables (12 euro stuck) from aliexrpess and all cable comme with fake ftdi chip and dont run with ista D

[Bimmer540]

Hi guys
yes green pcb cables work great also this time i buy 6 green pcb cables (12 euro stuck) from aliexrpess and all cable comme with fake ftdi chip and dont run with ista D

But which cable does work well with Ista and not too expensive?