Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kess v2.1 clone problems
15-11-2015, 07:19 AM,
Post: #21
|
|||
|
|||
RE: Kess v2.1 clone problems
|
|||
15-11-2015, 12:34 PM,
Post: #22
|
|||
|
|||
RE: Kess v2.1 clone problems
(14-11-2015, 23:37 PM)Lucian Mc Wrote: What should i do if i accidentaly broken the 3 soldering points on the motherboard because the soldering iron was too hot? Get someone who knows how to use a soldering iron Or if you learn better to use the soldering iron better then trace back where the pads go to and solder to those points instead if my post helps please give Reputation and Thanks
|
|||
Reputation: +1 - Lucian Mc [+1] | |||
21-11-2015, 11:07 AM,
Post: #23
|
|||
|
|||
RE: Kess v2.1 clone problems
I managed to find some one that soldered the jtag link on my motherboard but i cannot read the processors firmware ..... I had read something about uart method but cant find an method to do that properly. Already ordered uart 232 interface but untill in know how to use it i do not want to destroy more the motherboard.
|
|||
21-11-2015, 14:59 PM,
Post: #24
|
|||
|
|||
RE: Kess v2.1 clone problems
(21-11-2015, 11:07 AM)Lucian Mc Wrote: I managed to find some one that soldered the jtag link on my motherboard but i cannot read the processors firmware ..... I had read something about uart method but cant find an method to do that properly. Already ordered uart 232 interface but untill in know how to use it i do not want to destroy more the motherboard. Here how to connect on the UART. |
|||
22-11-2015, 19:37 PM,
Post: #25
|
|||
|
|||
RE: Kess v2.1 clone problems
I need informations about this 2 pins where they go. They are the 2 pins that i suspect are not well soldered because the motherboard points was destroyed by me ....
|
|||
23-11-2015, 10:45 AM,
Post: #26
|
|||
|
|||
RE: Kess v2.1 clone problems
Both pins are connected together and join to a pad at the side
if my post helps please give Reputation and Thanks
|
|||
19-12-2015, 09:22 AM,
Post: #27
|
|||
|
|||
Kess v2.1 clone problems
I sent mine away to a guy here in the uk in end really helpful been trained in soldering and reworks the whole board also re-flashes the software with know good working no token software
Sent from my iPhone using Tapatalk |
|||
02-01-2016, 10:50 AM,
Post: #28
|
|||
|
|||
RE: Kess v2.1 clone problems
Solved the problem of the broken pads and still cannot connect kess v2 to jlink. tried the uart method and did not work...
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content