Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Kess v2.1 clone problems
12-11-2015, 10:38 AM,
Post: #11
RE: Kess v2.1 clone problems
(12-11-2015, 03:14 AM)vagnum-uk Wrote:  Got mine working took a bit of working out the. This might help
You can next the software here to reset
http://saabworld.net/showthread.php?t=31505

Then read this it helped
http://blog.obdtool.co.uk/how-to-add-tok...kess-v2-2/

I did it 1st and it still had the error, I took it apart and took the SD card out formatted it then run the programme again all back up and running


Sent from my iPhone using Tapatalk
that software your friends on saabworld are sharing is not good virus's stop sharing that puke
there is clean versions an good resetters
Quote this message in a reply
12-11-2015, 10:39 AM,
Post: #12
Kess v2.1 clone problems
Really sorry I didn't know, I used it last night I thought it was good.


Sent from my iPhone using Tapatalk
Quote this message in a reply
12-11-2015, 10:44 AM,
Post: #13
RE: Kess v2.1 clone problems
Well mate get your system cleaned if you installed that software
Quote this message in a reply
12-11-2015, 17:22 PM,
Post: #14
Kess v2.1 clone problems
If anyone need help so contact ne on pm,i can help you guys!
Quote this message in a reply
13-11-2015, 09:31 AM,
Post: #15
RE: Kess v2.1 clone problems
Here is the resset no2 the cfg.
Install 2.08 put this file in udate folder and start the ksuite. message will disapear. attention only for sn:K10033818

No password - tested many times. if you need help pm me.


Attached Files
reset 2.rar
File Type: .rar
Downloaded: 86 times
Size: 636 bytes

Quote this message in a reply
[+] 4 users say Thank You to ovi730 for this post
13-11-2015, 10:03 AM, (This post was last modified: 13-11-2015, 10:05 AM by vagnum-uk.)
Post: #16
Kess v2.1 clone problems
Turns out mine when grey again a few days later but I did use a new sd card put the original 1 back in and did it again seemed to work ok now but will keep testing. I think I might try yours ovi730 see how that gets on.


Sent from my iPhone using Tapatalk

(12-11-2015, 10:38 AM)rhinestonecowboy Wrote:  
(12-11-2015, 03:14 AM)vagnum-uk Wrote:  Got mine working took a bit of working out the. This might help
You can next the software here to reset
http://saabworld.net/showthread.php?t=31505

Then read this it helped
http://blog.obdtool.co.uk/how-to-add-tok...kess-v2-2/

I did it 1st and it still had the error, I took it apart and took the SD card out formatted it then run the programme again all back up and running


Sent from my iPhone using Tapatalk
that software your friends on saabworld are sharing is not good virus's stop sharing that puke
there is clean versions an good resetters

Not my mates dude just something I found on the net when I needed a reset.


Sent from my iPhone using Tapatalk
Quote this message in a reply
13-11-2015, 10:17 AM,
Post: #17
RE: Kess v2.1 clone problems
If your tool just reached to the 9 remaining message you can use this resset cfg. Be aware to have the same serial no. It must be ussed with 2.08 version. This is the resset 2 from 750pack.
Quote this message in a reply
14-11-2015, 14:07 PM,
Post: #18
RE: Kess v2.1 clone problems
It is version 3.099 . Does this works on this version too?
Quote this message in a reply
14-11-2015, 22:39 PM,
Post: #19
RE: Kess v2.1 clone problems
Version 3.099 just needs reflagging fw with jlink
These reset cfg's are for kess with fw 4.036

if my post helps please give Reputation under and Thanks under
Quote this message in a reply
14-11-2015, 23:37 PM,
Post: #20
RE: Kess v2.1 clone problems
What should i do if i accidentaly broken the 3 soldering points on the motherboard because the soldering iron was too hot?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? ROD-BENDERS 142 20,279 01-05-2024, 16:13 PM
Last Post: mkii
ZTAudi CLONE ECU SIMOS 18.1 chowan 0 35 30-04-2024, 23:33 PM
Last Post: chowan
  edc15c13 clone ELMEPRO 1 41 29-04-2024, 19:10 PM
Last Post: pistolo30
  FormulaFlash - MMS Flex clone? rehatflogs 3 268 27-04-2024, 06:25 AM
Last Post: ROD-BENDERS
  Solved ✔ Audi A4 B8 2008 edc17cp14 clone 34ko 8 274 26-04-2024, 05:19 AM
Last Post: 34ko
0Engine OriginaL/Clone PCMFLASH Questions/Answers volavka 134 51,876 21-04-2024, 19:53 PM
Last Post: sasadz
ZVW Request: How to write to tuned EDC17CP20 only TprotOff file via Kess to OBD Zamperl 2 120 20-04-2024, 10:34 AM
Last Post: Zamperl
  Who can rework ORIGINAL KESS V2 pluto2013 7 1,915 15-04-2024, 17:43 PM
Last Post: mdanilo
  Red pcb kess 5.017 sd card image (files) stunt_rider 15 13,531 06-04-2024, 17:12 PM
Last Post: ilker_mania
  [Request] Ksuite 2.23 for reworked Kess and KTAG Jordiano 0 129 30-03-2024, 10:17 AM
Last Post: Jordiano

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content