[XSuperMarioX]

MAN EOL Flash File Editor&Pin Calculator it supports MAN programming ECUs.

• FFR-EDC pairing
• FFR parts number changing
• New/Used ECUs programming
• IMMO PIN codes
• FFR/EDC VIN number changing
• Language programming/changing
• Adblue removal

The software can work with archives firmware or directly to the database files of the Man Cats software.

The ECU's Programming is done via the menu in Man Cats software.

• FFR-EDC pairing
• FFR parts number changing
• FFR/EDC VIN number changing
• IMMO PIN codes for Key Learning
• Language programming/changing
• New/Used ECUs programming

MAN Immo Calculator, this software can do:

• Calculation password to form a pair (FFR-EDC) and firmware chip keys on vehicles MAN TG
• Preservation of the archive files firmware of vehicles for further processing and programming with MAN Offline programming software
• Unpacking treated firmware in Man Cats Software

Homepage -
Code:
http://www.man.eu

Requirements:
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 50 MB of available space
- CD-ROM

link:
https://mega.nz/#!RQRwUATC!gPv51D2tFBiJ_...xSh2kfB3U0

no pass

[Gabriel130592]

Hello, that extension files are opened ? in .BIN not recognize them. and being in Russian I can not translate it .
Greetings and thanks

[Raidraid]

MAN configuration editor

[XSuperMarioX]

Hello, that extension files are opened ? in .BIN not recognize them. and being in Russian I can not translate it .
Greetings and thanks

BIN ????.
Yes, some things are in Russian,and can be converted(eng-rus translation online-gogle translate).If display hieroglyphics or symbols,change the language in Win. to Ru-Cyrillic.And then translate
Extension files opens from mancatsII folder,udf file or vdf-cdf depends of diagnostic.Frst connect mancats on truck and open all diagnostic list(read all fault codes) or upload information list fro FFR/PTM. In Man eol file editor select File - open from mancatsII select one of them (vdf,udf,cdf).When choosing one of the options(vdf,udf,cdf) in file editor it must be show list of changes, which can be replaced and sent back to mancats folder.And then the changes can be programmed with mancats.
Man immo is for key code when prompted during programming.
It takes a long time to get acquainted with the work in this program because it is not the same for each diagnosis(Chinese or original Man)
Practiced in the program, and try out various possibilities,and you will reach results.

Kind regards

[gluharenko]

MAN configuration editor

link dead
reupload pls