Please Make Sure You Read The Forum Rules! , Thanks for registering We are glad you have chosen to be a part of our community :) Please do not use email addresses, website URLs, Skype info, or any other contact info as your Username.
  1. ObdToolUsa

  2. Martech

  3. ATM - Balkan

    atm balkan file service
  4. Piwis tester II

  5. SCN Coding

  6. ChiPTuninG



Post Reply 
Program id 48 fiat punto 2004 ?
18-11-2015, 18:15 PM
Post: #1
JFiat Program id 48 fiat punto 2004 ?
Hi guys i need to know which hardware it s better for me to program a id 48 megamos crypto for fiat punto 1.2 2004

thanx for help
Find all posts by this user
Quote this message in a reply
18-11-2015, 19:37 PM
Post: #2
RE: Program id 48 fiat punto 2004 ?
You can first read dump from delphi bsi with upa,xprog etc. Than you can precode transponder for obd programming or programm transponder which will directly start the car-for this operation you can use zed bull(clone or original). Or you can do all the job via obd with zed full or abritus.
Find all posts by this user
Quote this message in a reply
 Thanks given by: mista
18-11-2015, 20:42 PM
Post: #3
RE: Program id 48 fiat punto 2004 ?
Thanx a lot for help my friend can you tell me with wich software do you use with zed bull? i have already pincode to program the transponder can in program manually with zed bull?

which zed bull can you advice me ? thanx a lot
Find all posts by this user
Quote this message in a reply
18-11-2015, 20:50 PM
Post: #4
RE: Program id 48 fiat punto 2004 ?
I use original zed bull.But you can finish the job with clone device as well. There is an option to make transponder directly without obd progarmming,you can see that in zed bull soft
Find all posts by this user
Quote this message in a reply
 Thanks given by: mista
18-11-2015, 21:12 PM
Post: #5
RE: Program id 48 fiat punto 2004 ?
Ok if i understand i can write the pin directly with zed bull software witout to extract dump from bsi
can you advice me about zed bull original where can i buy it
did you listen positif comment about writting id 48 with zed bull clone

thanx a lot for help
Find all posts by this user
Quote this message in a reply
18-11-2015, 21:52 PM
Post: #6
RE: Program id 48 fiat punto 2004 ?
(18-11-2015 21:12 PM)mista Wrote:  Ok if i understand i can write the pin directly with zed bull software witout to extract dump from bsi
can you advice me about zed bull original where can i buy it
did you listen positif comment about writting id 48 with zed bull clone

thanx a lot for help

No, pincode itself isn't enough. You can make a precoded key only from the BCM (bsi) dump. Pin code is only for key teaching (with diag tool), if You don't write back the new key data directly to BCM eprom.
You can find original ZedBull distributors in attachment link.

br, tronico


Attached File(s)
ZedBull_distributors.txt
File Type: .txt
Downloaded: 35 times
Size: 43 bytes

Find all posts by this user
Quote this message in a reply
 Thanks given by: mista
19-11-2015, 14:07 PM
Post: #7
RE: Program id 48 fiat punto 2004 ?
Can you give me some idea about key teaching with diag tool for punto ?

thanx a lot
Find all posts by this user
Quote this message in a reply
30-11-2015, 22:20 PM
Post: #8
RE: Program id 48 fiat punto 2004 ?
Hi guys please who can explain me the différence between precoding and pin code
To program a id 48 do i need a unlocked transpondeur?
Thanx d'or help
Find all posts by this user
Quote this message in a reply
30-11-2015, 23:00 PM
Post: #9
RE: Program id 48 fiat punto 2004 ?
Mate,looks like you need basic knowledge about key programming,it is not easy to explain in only one post. Precoding is transponder related process which prepare transponder by dump data for obd programming. Pin code(personal identification number) allowed entering in key programming.
And yes,you need virgin(not previously programmed) transponder for this operation.
Find all posts by this user
Quote this message in a reply
 Thanks given by: mista
01-12-2015, 11:42 AM
Post: #10
RE: Program id 48 fiat punto 2004 ?
So if i understand if i order a transponder from net i need to precoded before to program it with pincode ?

because the problem i have a original transponder defect but it s the only one i m not sure i can read it again
thanx a lot for help
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Fiat Examiner 2 Plus Original in davor.touch 0 165 17-01-2017 10:46 AM
Last Post: davor.touch
JFiat Fiat Stilo seat emulator in obdstart 13 1,822 03-06-2015 12:18 PM
Last Post: dimitar
JFiat Fiat KKL interface issue in valifilioreanu 2 1,540 05-05-2014 17:10 PM
Last Post: mattydr67

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content