[audia4]

It is impossible to change in MMI - (green menu), because the radio separate hardware and software

[Sander77]

That pdf says how to change fonts from US to EU, that MMI can use EU software with EU fonts. No more in that pdf.

US freq. are changin in 0.3 where EU 0.1 that's way to chande freq. to use radio as are stations in EU.
I can change it in green menu but after mmi restart it changes to US freq...

Until next start up, yes, its possible to change this in green menu!

And its map thread, so please move over to correct one.

Nobody will give you instruction for "cable" work...

So, other language, but:

"Радио сделал,что-то не дает дампы выложить на форум для образца.
1. смотрим ВАГ-Комом в блоке Радио "long coding" (020007010000000001)
2. снимаем блок Радио, разбираем полностью, ищим снизу на большой плате епромку 24с256
3. читаем дамп, ищим "02 00 07 01",конкретнее находится в строке 1060
4.меняем первые байты (02 -->00),тоесть получается 00 00 07 01
5. записываем и собираем,должно все работать. "

[stumo]

Hello,

I'm not a pro computer, while still kool with me
I have complete files I already had with those of the post first( see attachement), it seems you okay?
   

I'm MMI 3G High and no updates since 2010 (original).

I walked the info on this position but there is something that escapes me .
I have to do something with the 0004000B.fsc file? put the code ....?
or my MMI 3G High 6.22.4 the activation file and already set for my car and therefore nothing to do just follow the instruction of the PDF?


Thank you

[Sander77]

Hello,

I'm not a pro computer, while still kool with me
I have complete files I already had with those of the post first( see attachement), it seems you okay?


I'm MMI 3G High and no updates since 2010 (original).

I walked the info on this position but there is something that escapes me .
I have to do something with the 0004000B.fsc file? put the code ....?
or my MMI 3G High 6.22.4 the activation file and already set for my car and therefore nothing to do just follow the instruction of the PDF?


Thank you

All good, no need anything to do with fsc, just go by instructions, soft 257_6 first after map and activation!

[stumo]

thank you

[syncroflash]

Hello,

can someone help with this:

http://cartechnology.co.uk/showthread.php?tid=14904

thanks a lot...

[stumo]

Another question, i read , i must copy on the root my firmware but when open i have different Repertoir, 1 ,2 and 3,that contain similar or almost folder.
How do I proceed?
The following image shows the different folders:
   
   
   
   

I owe everything to the directories or selection?

Merci

[Sander77]

Another question, i read , i must copy on the root my firmware but when open i have different Repertoir, 1 ,2 and 3,that contain similar or almost folder.
How do I proceed?
The following image shows the different folders:





I owe everything to the directories or selection?

Merci

Yes, on FW you copy to the sdcard 5 folders and metainfo...
Same with map, not the main folder, but everything in it!

This how it will look:
MU9308
MU9307
1
2
3
Metainfo2.txt

with map, sdcard root will look like this:

MMI3G
MMI3GP
pgkdb
build1
config...
dbinfo
metainfo2

If map will not fit to the sdcard, delete folder LIT3GP! (its for 3G high - soft HNav)

[stumo]

Thank you Sander77

[koxx.fr]

Hi,

does anybody tried these map on A8 2012 or similar?

thx