Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
MERCEDES XENTRY 12-2015 WINXP SDCONNECT ACRONIS IMAGE ATA
11-01-2016, 04:13 AM,
Post: #21
|
|||
|
|||
RE: MERCEDES XENTRY 12-2015 WINXP SDCONNECT ACRONIS IMAGE ATA
Thanks. I did run the patch for DAS 870 error, DAS black list fix, and Xentry black list fix. Like I said at the beginning all three SD C4 units work fine with Xentry 05/2015. I just noticed that the DAS black list fix that I got from xxxx is for part D2. Do you have the cal.ini file for DAS 12/2015 for part T ?
Is it ok if I just edit the cal.ini and change D2 to T ? |
|||
11-01-2016, 04:50 AM,
Post: #22
|
|||
|
|||
RE: MERCEDES XENTRY 12-2015 WINXP SDCONNECT ACRONIS IMAGE ATA
Actually, SD Connect doesn't need DAS blacklist. But if you don't face any problem yet, let it be.
yes, you can edit and change with notepad the contents of: f:\programme\das\bin\cal.ini change D2 to T c:\userdata\config\hhtwin\hhtwin.ini change D2 to T2 |
|||
11-01-2016, 05:59 AM,
Post: #23
|
|||
|
|||
RE: MERCEDES XENTRY 12-2015 WINXP SDCONNECT ACRONIS IMAGE ATA
Should the last line be changed to T2 or T ?
|
|||
11-01-2016, 06:03 AM,
Post: #24
|
|||
|
|||
RE: MERCEDES XENTRY 12-2015 WINXP SDCONNECT ACRONIS IMAGE ATA
For hhtwin.ini, SLAVE=PARTT2
for cal.ini, PLATFORM=PART_T |
|||
11-01-2016, 06:20 AM,
Post: #25
|
|||
|
|||
RE: MERCEDES XENTRY 12-2015 WINXP SDCONNECT ACRONIS IMAGE ATA
Thanks. I checked the hhtwin.ini file and the slave was already PARTT2.
When I changed the cal.ini to PART_T I received a different error, see the attached picture. So, there is something else not working as it should. If you can please help me. Thank you. The connecting cable is good. After getting this message I switched the laptop to my other one with Xentry 05/2015 and everything works good. |
|||
Reputation: +1 - Jacks76 [+1] | |||
11-01-2016, 08:56 AM,
Post: #26
|
|||
|
|||
RE: MERCEDES XENTRY 12-2015 WINXP SDCONNECT ACRONIS IMAGE ATA
|