Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E38 can't connect to any module via diagnostic port ADS
02-01-2016, 17:52 PM,
Post: #1
|
|||
|
|||
E38 can't connect to any module via diagnostic port ADS
Hi
I have a problem connecting to BMW E38 1996. I've tried three interfaces (2 with INPA, one universal) and i can't connect to any module (tried DME, Airbag, EWS ...) My interfaces work fine, they work for sure with ADS and old BMWs What can be wrong with this car? There's an airbag light on dashboard. I have checked diagnostic socket, voltage pin (12v) is ok, and ignition pin is also ok. |
|||
02-01-2016, 18:04 PM,
Post: #2
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
(02-01-2016, 17:52 PM)fold Wrote: Hi Are you connecting to Round Plug or OBDII ? seat occupancy sensor If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
02-01-2016, 18:08 PM,
Post: #3
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
I'm connecting to round plug under the hood
I didn't find OBDII in this car, i think BMW put it in cars from 1998 |
|||
02-01-2016, 18:12 PM,
Post: #4
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
(02-01-2016, 18:08 PM)fold Wrote: I'm connecting to round plug under the hoode38 OBDII since 1995 If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
02-01-2016, 18:46 PM,
Post: #5
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
Thanks, I'll check this but still wondering why I can't connect thorough round connector?
Engine is M73 |
|||
02-01-2016, 18:52 PM,
Post: #6
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
(02-01-2016, 18:46 PM)fold Wrote: Thanks, I'll check this but still wondering why I can't connect thorough round connector? Fuse? does your cigarette lighter work? wrong protocol? wrong configuration? Check for Logs on windows side and on edibas side of things If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
02-01-2016, 20:39 PM,
Post: #7
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
Disconnect your battery for half an hour and then retry through the ADS.
|
|||
03-01-2016, 13:10 PM,
Post: #8
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
Hi,
have you changed the file "EDIABAS.INI" / "OBD.INI" from ADS to OBD Mode ? COM Port Settings ok ? |
|||
03-01-2016, 19:57 PM,
Post: #9
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
Try with another INTRUMENT CLUSTER because on this car this is the gateway to diagnosys
|
|||
04-01-2016, 06:11 AM,
Post: #10
|
|||
|
|||
RE: E38 can't connect to any module via diagnostic port ADS
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content