[CarT01]

Hi guys,

i have replace the FRM2 LED NSW with an FRM3 XE.

VIN Change with WINKFP successfull.
FA WRITE to FRM successfull.
Coding to FRM successfull.

After this procedure, the vin and fa shows correct in INPA UIF and NCS.

But when i read with INPA, there is a wrong I-Stufe HO and Werk.
When i read with ISTA/P, there is also a wrong I-Stufe HO and Werk.
In ISTA/P all modules and the Zentral Gateway Module are not reply.

In attachment you can see a screenshot from INPA with wrong I-Stufe, the car is an E91 build date 09/2008, with the newest I-Stufe E89x-15-11-500.

Has anyone an idea to solve this problem?

Thank you very much!

[Fx82]

You can change this with Tool32. Google on it I've read it somewhere.

[CarT01]

You can change this with Tool32. Google on it I've read it somewhere.

Can you give me more information. I don't find anything on this topic.

[Fx82]

Open the correct .prg with tool32. You can check that with ncsexpert. (frm2 = frm_70.prg)
Select job i_stufe_lesen. You will now see the current i_stufe.
Select i_stufe_schreiben and in the arguments write the new i_stufe but write in a valid format. For example E89X-11-09-505

Don't change I_Stufe_werk

[CarT01]

Is this the solution for the problem that control units aren't replying in ISTA/P, too?

[Fx82]

No are they responding with ista-d?

[CarT01]

With ISTA/P no are responding.

[Fx82]

I know that's why I asked with ista-d/Rheingold?

[Jakes300]

I have the same thing. CAS,CID, COMBOX and IHKA not responding with ISTA+ 3.53 on integration level E89X-15-11-500. I am guessing it's because ISTA+ is on a lower level.