Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kess v2 2.15 Master FW V4.036
24-01-2016, 03:11 AM,
Post: #11
|
|||
|
|||
RE: Kess v2 2.15 Master FW V4.036
(23-01-2016, 10:19 AM)teamtuner Wrote: i don"t understand...why you need to conect to internet at the end?...you never will do updates or virtual reads...my sw is patched to not conect to internet...but must to buy kess 3.099 fw,and update to me... Thank you for clarifying this, my intention really is not to update it using the internet. I just want to plug it to my computer/laptop without turning the wifi off or unplugging the Ethernet cable. So to do this, there is the need TO BUY from you the softwares. |
|||
24-01-2016, 17:10 PM,
Post: #12
|
|||
|
|||
RE: Kess v2 2.15 Master FW V4.036
(24-01-2016, 03:11 AM)toastedsiopao Wrote:(23-01-2016, 10:19 AM)teamtuner Wrote: i don"t understand...why you need to conect to internet at the end?...you never will do updates or virtual reads...my sw is patched to not conect to internet...but must to buy kess 3.099 fw,and update to me... mate...if you want only to buy,you buy...but...if you search more,and more,you will find all you need for free...take 2.08 version patched for internet...al EU clones use this sw...and 80% of users |
|||
Reputation: +1 - toastedsiopao [+1] | |||
24-01-2016, 21:43 PM,
Post: #13
|
|||
|
|||
RE: Kess v2 2.15 Master FW V4.036
There are three software for Kess.
1. Firmware for the NXP 2. Firmware on the SD Card 3. Software on the PC. What are the versions compatible with each other and what to install first? Another, as I was reading the ads in ebay and in aliexpress, can I just reload the tokens from the included CD into the Kess programmer once the tokens were used up, or I can only use the tokens in the CD once, then after they were used up I should look for other sources? |
|||
24-01-2016, 22:35 PM,
Post: #14
|
|||
|
|||
RE: Kess v2 2.15 Master FW V4.036
E-bayshit...mate...wake up...kess need good pcb,and good reseter with good tokens...we talk about here by NXP processor...fw 3.099 is old but for tokens need reflash nxp by j-link or u-link
4.036 have nxp crp3 protected...no way to reflash processor...so,need tokens (key to open processor)...and need real good key...so,pay more money than ebayshit and play with a good tool ...for not fucx cars...one ecu will cost you more than one good tool |
|||
25-01-2016, 07:21 AM,
Post: #15
|
|||
|
|||
RE: Kess v2 2.15 Master FW V4.036
R232 (uart flashmagic = NO crp3 protected) + J-Link + brain = kess 2 + k-tag master
I think K-TAG with BDM Frame and BDM- BSL Probe better ... |
|||
28-01-2016, 15:29 PM,
Post: #16
|
|||
|
|||
RE: Kess v2 2.15 Master FW V4.036
You have the steps to unlock?
|
|||
28-01-2016, 20:31 PM,
Post: #17
|
|||
|
|||
RE: Kess v2 2.15 Master FW V4.036
(28-01-2016, 15:29 PM)toastedsiopao Wrote: You have the steps to unlock? Here you go. For more infos write PM. |