Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E46 How Coding Central locking with NCSExpert
22-01-2016, 16:41 PM,
Post: #1
|
|||
|
|||
BMW E46 How Coding Central locking with NCSExpert
How Coding Central locking with NCSExpert from e46 2004.
I want to code: Car locks automatically after a preset speed is reached. Car unlocks all doors when ignition turned off and key removed. Can someone explain to me how to do this. |
|||
22-01-2016, 17:44 PM,
Post: #2
|
|||
|
|||
RE: BMW E46 How Coding Central locking with NCSExpert
(22-01-2016, 16:41 PM)snypertje Wrote: How Coding Central locking with NCSExpert from e46 2004. Simple Watch some videos HERE Auto-Un-Locking never worked for me on 46/39/38 The procedure as follows Turn off car, wait for 30-sec remove key from ignition "BOOK SAYS" it should auto-unlock -IT NEVER-WORKS If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
22-01-2016, 17:55 PM,
Post: #3
|
||||||||||
|
||||||||||
RE: BMW E46 How Coding Central locking with NCSExpert
NCSExpert, profile expertman (expert mode with manipulation). 1. Perform "Codierdaten_Lesen" job on GM (General body module). 2. Open "FSW_PSW.TRC" file in C:\NCSEXPER\WORK\ folder with notepad. 3. Find line "VERRIEGELN_AUT_AB_X_KM/H". You have 2 options: 'nicht_aktiv' and 'aktiv'. Set to 'aktiv'. 4. Find line that says "VERRIEGELUNGSSCHWELLE". Speed dependent locking. You have options: 'klemme_r' (with ignition) '4_km/h' '8_km/h' '12_km/h' '16_km/h' '20_km/h' '24_km/h' '28_km/h' 5. ***Save your changes as FSW_PSW.MAN*** 6. And perform job SG_CODIEREN on GM module. This uses data from the FSW_PSW.MAN file to code back. 7. Turn ignition off, and on. See my pdf example below for E36 coding (I am 328 Power 04 on Bimmerforums). It is the same idea, but you choose E46, and GM module.
|