Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
26-01-2016, 14:55 PM,
Post: #1
|
|||
|
|||
BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
I have a problem with Active Sterring in '04 E61, it has an error:
006131 - AL: Control unit: flash operation or error NEC (Rheingold 3.52) Firstly I tried to program AL control unit with WinKFP and ISTA/P, but it goes to 100% and then got an error (WinKFP): 2089 PABD switching programming mode failed. 10FLASH, DIAGNOSE_MODE (ECUPM); ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_REQUESTED 2086 PABD Signature chceck failed 10_FLASH, FLASH_SIGNATUR_PRUFEN (Daten;255) ERROR_ECU_ROUTINE_NOT_COMPLETE 2086 Error Signature check failed SG_PROGRAMMIEREN 2086 Error Signature chceck failed I replaced AL control module (under passenger's seat), but got the same issue. |
|||
27-01-2016, 12:36 PM,
Post: #2
|
|||
|
|||
RE: BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
Read error with Inpa
|
|||
27-01-2016, 13:38 PM,
Post: #3
|
|||
|
|||
RE: BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
Which interface programming car?
if D-CAN - ansfer is : change interface... AL programming is possible ONLY with ICOM or OPS |
|||
27-01-2016, 18:49 PM,
Post: #4
|
|||
|
|||
RE: BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
Problem by the ECU
replace it with another. |
|||
27-01-2016, 21:32 PM,
Post: #5
|
|||
|
|||
RE: BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
Try another machine
|
|||
28-01-2016, 07:45 AM,
Post: #6
|
|||
|
|||
RE: BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
I program it with ICOM A. I replaced ECU with used one but nothing changed. Could be another ECU with the same error? Cables to AL ECU are ok, fuses are ok.
Wysłane z mojego Nexus 6 przy użyciu Tapatalka |
|||
28-01-2016, 10:34 AM,
Post: #7
|
|||
|
|||
RE: BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
Course it can be faulty as yours
secondhand item always can be fucked up |
|||
03-03-2017, 02:11 AM,
Post: #8
|
|||
|
|||
RE: BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
You must CHANGE AL ECU, ecu is defecive!
|
|||
07-03-2017, 17:23 PM,
Post: #9
|
|||
|
|||
RE: BMW E61 Active Sterring Fault - 6131 Flash operation or error NEC
Yes, had the same issue long time ago! Got another used AL ecu, same error! I checked everything, can-bus, powers grounds all ok. Programmed with original icom and ista p or winkfp. Even expert mode winkfp same issue as you! Turned out to be defective AL ECU! So even the used one was bricked.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW F20 ACSM4B internal error | Pedrom92 | 1 | 39 |
2 hours ago Last Post: kimz |
|
Flash CAS 3 for disable ELV | UnFan | 3 | 117 |
11 hours ago Last Post: ravager |
|
Need help for an error. | TibeRiuSca | 1 | 59 |
Yesterday, 05:19 AM Last Post: cipi gutuie |
|
DDE509 Internal fault 7 code 4703 | GoNz0- | 0 | 58 |
14-04-2024, 14:42 PM Last Post: GoNz0- |
|
VO code RSE_HIGH_NBT2 error | HU_man | 3 | 142 |
12-04-2024, 07:08 AM Last Post: Node |
|
Flash MPPK software 20D B47 (Esys) | ruben_17non | 5 | 563 |
10-04-2024, 21:38 PM Last Post: ruben_17non |
|
Error by Ista ABL_DIT_AS6100_TRAMODE_RESET | arcelik | 18 | 607 |
08-04-2024, 19:58 PM Last Post: Fatalix |
|
xdrive off with esys without error in dash | dankocg | 14 | 2,816 |
07-04-2024, 08:57 AM Last Post: Fatalix |
|
NBT Evo CAFD missing after coding error | Mugga | 12 | 497 |
05-04-2024, 20:30 PM Last Post: Mugga |
|
Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,476 |
01-04-2024, 11:34 AM Last Post: ivanp |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content