[Acvigs]

Greetings, Has any one used digiprog3 with Acura? If so what make/model did you use to successfully write with?

[Clusters]

Sure, with the eeprom menu. Remove the back and find the eeprom, read it with eeprom menu and calculate manually. Or post the dump here and someone will edit it for you, but include the original mileage.

[Acvigs]

Digi doesn't have Acura on the list. What make/model can I use

[Clusters]

There is no other car type that I know of that will work on that and it's not always clip on and push buttons, sometimes you have to work for it and do it manually.

Under eeprom menu, set type, read the chip, save the dump, edit the dump, write the dump.

[Acvigs]

Pardon me but exactly how do I get the dump off of digiprog onto a laptop,also do i need another machine to edit the dump and after i edit the dump how do i get it onto the chip. Can this all be done with digiprog. I've seen everyone posting dumps via rar files but i have no idea how to convert or edit any. Thank you

[brunofraga]

Try to read as Toyota highlander and double check if the mileage showing is the same, you most save your original dump file prior to change. good luck

[XmoDDeR]

In digiprog menu use honda shuttle c46 that will do it for you.

remember rep and thanks enjoy

[DashPro]

If you need to move the dump to the computer you can download etool
and plug usb into digi then goto special functions then click pc term
a small window will pop up pc term at this point dont touch digi any more
goto your laptop open eetool and you must have drivers to if you need um let me know ill dig them up

so when you open eetool the screen wil read com port and itll be on the one digi is hooked to
click ok
wait 30 seconds your files on digi will be on screen
you can them click on one and goto file save as and there ya go but it wont transfer mcu files dont bother just eprom

---

download to pc
calc on pc
upload to digi same way
write to eprom
done