[romanr]

Hi guys .

After somes hard day with instaling IDS i find finaly HOW it instal without VMware .

first must set date in bios on 6.august 2015, , fresh instal WIN7, instal calibration file 81 , than IDS v86 instaling driver , reboot computer than patch, reboot computer , than conect VCM start and write you about licence than continue and coming message about 3 days expiration licence, close all unplug VCM , and than 99 version ,reboot, plug in VCM start program test if is all ok if work diagnostic. if yes than turn off IDS unplug VCM instal freze software and ALL IS OK . dont forget befor start computer with win7 and IDS anytime must FIRST SET THIS DATE IN BIOS !!!!!!!!

i instaled maby 20 times windows IDS and VCM with lot of tutorials but only this one work for me without virtual machine . i dont wil pay for solution so i go to harder way and try and try and try

if help you this info pls push thanks and reputation. maby next time you help me friend ...

here in forum have fantomel version 99.1 and this work without problem . flashing too. so big thanks to him for this version

[fusername]

Friends, just tell me something...

is it really enough to change serial number of vcm ii to another non-blacklisted original one's serial (as vcm ii of a dealer) ??

license and time problem is easy for me that I use VMWare. but my problem is about vcm ii itself. today I changed my vcm ii serial to one, which is said to me that from a dealer tool. but I again couldn't use it even with 96.01

then I applied "Firmware Updates" patch and I achieved to work on 96.01; however before I tried that patch for 99.01 and I saw that it doesn't for for 99.01.

just tell me simply: did anybody really tried to change his vcm ii serial to a non-blacklisted genuine serial, and achieved to use with 99.01/98.01/97.01/96.01 etc???

please enlight me, please please please...

[Inspector_Gadget]

Friends, just tell me something...

is it really enough to change serial number of vcm ii to another non-blacklisted original one's serial (as vcm ii of a dealer) ??

license and time problem is easy for me that I use VMWare. but my problem is about vcm ii itself. today I changed my vcm ii serial to one, which is said to me that from a dealer tool. but I again couldn't use it even with 96.01

then I applied "Firmware Updates" patch and I achieved to work on 96.01; however before I tried that patch for 99.01 and I saw that it doesn't for for 99.01.

just tell me simply: did anybody really tried to change his vcm ii serial to a non-blacklisted genuine serial, and achieved to use with 99.01/98.01/97.01/96.01 etc???

please enlight me, please please please...

The simple answer is no...changing the serial in most vcmii is not enough even if the serial is genuine .

[mauroxj]

Hi guys .

After somes hard day with instaling IDS i find finaly HOW it instal without VMware .

first must set date in bios on 6.august 2015, , fresh instal WIN7, instal calibration file 81 , than IDS v86 instaling driver , reboot computer than patch, reboot computer , than conect VCM start and write you about licence than continue and coming message about 3 days expiration licence, close all unplug VCM , and than 99 version ,reboot, plug in VCM start program test if is all ok if work diagnostic. if yes than turn off IDS unplug VCM instal freze software and ALL IS OK . dont forget befor start computer with win7 and IDS anytime must FIRST SET THIS DATE IN BIOS !!!!!!!!

i instaled maby 20 times windows IDS and VCM with lot of tutorials but only this one work for me without virtual machine . i dont wil pay for solution so i go to harder way and try and try and try

if help you this info pls push thanks and reputation. maby next time you help me friend ...

here in forum have fantomel version 99.1 and this work without problem . flashing too. so big thanks to him for this version

And which freeze method are you using? Have you seen your IDS working after 3 days installed? Because I used Deep Freeze standard and it freezes the hard disk but it does not freeze the date, so after 3 days it has stopped working for me.
Also when that happened, I formated the hard disk, install fresh windows, and when try to install IDS it doesn't give me the 3 days trial option... so it know it has been installed in that machine!! how the heck is that possible??

Thanks

[jaimie946]

Hi guys .

After somes hard day with instaling IDS i find finaly HOW it instal without VMware .

first must set date in bios on 6.august 2015, , fresh instal WIN7, instal calibration file 81 , than IDS v86 instaling driver , reboot computer than patch, reboot computer , than conect VCM start and write you about licence than continue and coming message about 3 days expiration licence, close all unplug VCM , and than 99 version ,reboot, plug in VCM start program test if is all ok if work diagnostic. if yes than turn off IDS unplug VCM instal freze software and ALL IS OK . dont forget befor start computer with win7 and IDS anytime must FIRST SET THIS DATE IN BIOS !!!!!!!!

i instaled maby 20 times windows IDS and VCM with lot of tutorials but only this one work for me without virtual machine . i dont wil pay for solution so i go to harder way and try and try and try

if help you this info pls push thanks and reputation. maby next time you help me friend ...

here in forum have fantomel version 99.1 and this work without problem . flashing too. so big thanks to him for this version

And which freeze method are you using? Have you seen your IDS working after 3 days installed? Because I used Deep Freeze standard and it freezes the hard disk but it does not freeze the date, so after 3 days it has stopped working for me.
Also when that happened, I formated the hard disk, install fresh windows, and when try to install IDS it doesn't give me the 3 days trial option... so it know it has been installed in that machine!! how the heck is that possible??

Thanks

you must wipe the hard drive. formatting will not clean the boot sector, ids writes to the boot sector. I use derik's boot nuke. just use quick mode. as for ids going past the 3 day trial make sure you roll back to the install date you installed it.

[fusername]

Friends, just tell me something...

is it really enough to change serial number of vcm ii to another non-blacklisted original one's serial (as vcm ii of a dealer) ??

license and time problem is easy for me that I use VMWare. but my problem is about vcm ii itself. today I changed my vcm ii serial to one, which is said to me that from a dealer tool. but I again couldn't use it even with 96.01

then I applied "Firmware Updates" patch and I achieved to work on 96.01; however before I tried that patch for 99.01 and I saw that it doesn't for for 99.01.

just tell me simply: did anybody really tried to change his vcm ii serial to a non-blacklisted genuine serial, and achieved to use with 99.01/98.01/97.01/96.01 etc???

please enlight me, please please please...

The simple answer is no...changing the serial in most vcmii is not enough even if the serial is genuine .

simply thank you tizwaz, for every helps and especially for your patch

[mattydr67]

That one its a Mazda VCM2
Are you using it with Ford IDS v99.xx?
Did you test it into the car?
Or are you just advertise anything?
To make works Mazda VCM2 in Ford IDS after v97.xx + or Ford VCM2 to works in Mazda IDS after v97.xx + its not as before.
Even the tool is seen in the IDS this not mean that you can connect to the car
Good luck

[crackos20]

Link is dead

[fantomel]

Go here: http://cartechnology.co.uk/showthread.php?tid=13451
All is there and much more

[viejomatius]

Hello partners what software do you recomend to wipe hard disk, already tried with DiskWipe.exe but still Doesn't give me the 3 days trial option
THanks in advance!