Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
XProg 5.5.5 NO DONGLE (SW&FW)
18-07-2019, 12:17 PM,
(This post was last modified: 18-07-2019, 12:24 PM by Emilio.)
Post: #54
|
|||
|
|||
RE: XProg 5.5.5 NO DONGLE (SW&FW)
Help
"Fuse Low Byte" BOOLEVEL=0, BODEN=0, SUT0=0 "Fuse High Byte" SPIEN=0, CKOPT=0, BOOTSZ1=0, BOOTRST=0 "Extended Fuse Byte" None "Lock Bit Byte" LB2=0, LB1=0 see below if this is correct? L : 0x2F H : 0xCA E : 0xFF LB : 0x3C I'm using avrdudess 2.8 to write please see if this setting is correct? "Fuse Low Byte" BOOLEVEL=0, BODEN=0, SUT0=0 "Fuse High Byte" SPIEN=0, CKOPT=0, BOOTSZ1=0, BOOTRST=0 "Extended Fuse Byte" None "Lock Bit Byte" LB2=0, LB1=0 see below if this is correct? L : 0x2F H : 0xCA E : 0xFF LB : 0x3C |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content