[Simple]

Automatically updating VCI Firmware

To make DiagBox check the VCI firmware and update if necessary,

Precaution:
Copy or move all files (NOT folders) inside "C:\AWRoot\bin\Launcher\" to a safe location before performing the following:

1- Download "Launcher.rar" from the link provided
2- Extract all files into "C:\AWRoot\bin\Launcher\" skipping or replacing existing files (ap.ini need to be replaced)
3- Rename your preferred Firmware inside Launcher folder to APPLI.COM
4- Connect your VCI and wait until it is recognised
5- Launch DiagBox, it will check the VCI Firmware and update ONLY if necessary.

You can disable this function by setting "MAJ_COM=TRUE" to "MAJ_COM=FALSE" in "C:\AWRoot\bin\Launcher\ap.ini"

Note: Some users may be afraid that a damaging APPLI.COM may be included in a future update release. If you are concerned, it does not matter if this is feasible or not, change AP.INI settings to disable firmware update after performing your desired update and put your mind at rest.

Remember the "At your own risk" symphony!!

Simple..