[simplextibi]

Hi all
I had a power failure while flashing NBT unit, now I cant connect and the unit keeps reseting itself.
Anyone know how to put it in recovery mode to be able to reflash it?


Maybe jtag connection or somewhere in it a jumper to reset would work, any info ?

thanks

[Select25]

Did you use E-Sys or Ista/P?

[simplextibi]

I used e-sys, then it was a power failure on the laptop

[osd]

Did you try now with ista p?

Wysłane z mojego MI 4W przy użyciu Tapatalka

[Select25]

That's what i would say. Try a reprogramming with the newest ISTA/P and a good battery Charger!

[osd]

I'm afraid that when it's rebooting there is a chance that ista won't help.... But worth to try.

Wysłane z mojego MI 4W przy użyciu Tapatalka

[Select25]

In many cases when that Problem comes up that your Head Unit restarts a reprogramming can fix it. Just give it a try.

[simplextibi]

I did but can!t do it
there must be a jtag waz
anz info on that ?

[osd]

Did you try ista or only e sys?

[gfriedrichi]

Hi friend

Did you use icom or enet,
Using esys are you able to connect again and read car ecus ?
What happens in lcd monitor it shows a blue screen ?