Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW Scanner 1.4x 64bit drivers
22-02-2016, 18:59 PM,
Post: #1
|
|||
|
|||
BMW Scanner 1.4x 64bit drivers
Hi All,
After messing about for many hours, I've finally managed to install PA Soft BMW Scanner 1.4x on my 64bit windows 7 laptop. I've modified the driver set that I used so that it now installs as the BMW Scanner. So to install, Download and unzip. Open device manager Insert BMWScanner into usb port Then look at the USB controllers section and see the USB controller interface with the warning trangle. Select and then update driver, use the find on my machine and select the choose from installed drivers list. Select the USB controllers and "have disk" option and point to the unzipped dir, select and press ok, it will say that the driver is not digitally signed, but ignore and press OK. This will install the BMW Scanner controller, this is all you need for the scanner to start working, however it will also install the USB com port setup. To install the com port setup, again use the update driver and then point to the install dir and click ok, (not the have disk section) again it will say that the driver is not digitally signed, but ignore and press OK. This will install the com port setup. Your BMW scanner should now be working. Hope this helps others. |