Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DiagBox 8.01 Installation
30-11-2016, 18:55 PM,
Post: #61
|
|||
|
|||
RE: DiagBox 8.01 Installation
I have come across this on Windows 7 some time back as well, but I cannot remember how did I solve it. I am not sure if it is related to the Windows 7 Version/Release (Retal/VL or the SP).
In the mean time try Windows XP, it is faster and needs less resources. P.S. Install Internet Explorer 8 on XP if you can.. |
|||
15-12-2016, 18:14 PM,
Post: #62
|
|||
|
|||
RE: DiagBox 8.01 Installation
Hello mr Simple,
First of all as usual I thank you so much for your work and shared knowledge and clear explanations. One thing is confusing for me: when installing from v8.01 as this thread says, it has to be done with internet connected? Or disconnected ? Another question, do you recommend installing your v8.01 and then move forward until v8.38 or is it ok if I have installed old v7.57 from scarymistake and then move on with your updates? Thank you! |
|||
15-12-2016, 19:03 PM,
(This post was last modified: 15-12-2016, 22:34 PM by Simple.)
Post: #63
|
|||
|
|||
RE: DiagBox 8.01 Installation
(15-12-2016, 18:14 PM)mauroxj Wrote: One thing is confusing for me: when installing from v8.01 as this thread says, it has to be done with internet connected? Or disconnected ?I used to perform these updates with the network disconnected, I now do it with the network connected. Currently, it does not matter, but may be later PSA will develop something to access your system and lock it. Just make sure that you have a copy of APPDIAG.SYS backed up somewhere. (15-12-2016, 18:14 PM)mauroxj Wrote: Another question, do you recommend installing your v8.01 and then move forward until v8.38 or is it ok if I have installed old v7.57 from scarymistake and then move on with your updates?You should start with any version of DiagBox higher than 7.49. If you have nothing installed, the easiest is 7.01/02 --> 7.xx-7.57; because it is only 2 operations. Then install DiagBox v8.01 in accordance with the procedure in the 1st post. then install all updates up to 8.17, after that you need APP 8.17-8.37 then APP-8.35-8.38.. I hope maitresox will work on DiagBox v8 updates, he said he might. This is his message: Salut Simple, Bien sur, ce que tu fais est déjà appréciable. Je n'ai pas le temps de retravailler sur les Maj après 8.17 Lorsque j'aurai du temps, j'essaierai de refaire les maj à partir de 8.17 sur ma version 8.02 All ready patched. Je ne peux rien promettre. A+ |
|||
Reputation: +2 - Joe2 [+1] , Enia [+1] | |||
14-01-2017, 23:28 PM,
(This post was last modified: 14-01-2017, 23:29 PM by donjuan020.)
Post: #64
|
|||
|
|||
RE: DiagBox 8.01 Installation
Share Video Please ... How to install Diagbox 8.xx?
Thank You. |
|||
30-01-2017, 11:18 AM,
(This post was last modified: 30-01-2017, 11:22 AM by Simple.)
Post: #65
|
|||
|
|||
RE: DiagBox 8.01 Installation
Linked a video that is available on the net to the first post. Just edit "version.ini" file in "C:\AWRoot\bin\fi\" when finished to ONLY read:
[APPLICATION] Version=07.817 |
|||
19-02-2017, 19:51 PM,
(This post was last modified: 19-02-2017, 19:52 PM by volavka.)
Post: #66
|
|||
|
|||
RE: DiagBox 8.01 Installation
Hi simple . thanks for the great work
do you have link to download DiagBox 7.01.iso ? Br.Mouad BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
20-02-2017, 09:20 AM,
Post: #67
|
|||
|
|||
RE: DiagBox 8.01 Installation
Did you manage to download DiagBox 7.01?
|
|||
21-02-2017, 11:09 AM,
Post: #68
|
|||
|
|||
RE: DiagBox 8.01 Installation
(15-12-2016, 19:03 PM)Simple Wrote:(15-12-2016, 18:14 PM)mauroxj Wrote: One thing is confusing for me: when installing from v8.01 as this thread says, it has to be done with internet connected? Or disconnected ?I used to perform these updates with the network disconnected, I now do it with the network connected. Currently, it does not matter, but may be later PSA will develop something to access your system and lock it. Just make sure that you have a copy of APPDIAG.SYS backed up somewhere. Hi, but where i can find APP 8.17-8.37 and then APP-8.35-8.38? In first Post latest update it's 8.15-8.17 Many thanks |
|||
21-02-2017, 13:47 PM,
(This post was last modified: 21-02-2017, 13:48 PM by Simple.)
Post: #69
|
|||
|
|||
RE: DiagBox 8.01 Installation
In the thread that is entitled "Lexia & PP2000 updates (Up-to DiagBox v8.38)"
|
|||
01-03-2017, 19:18 PM,
Post: #70
|
|||
|
|||
RE: DiagBox 8.01 Installation
(30-11-2016, 18:55 PM)Simple Wrote: I have come across this on Windows 7 some time back as well, but I cannot remember how did I solve it. I am not sure if it is related to the Windows 7 Version/Release (Retal/VL or the SP). need some help with install 8.01 . I use win7 os and i have working version 7.82 after step 4. and step 5.( from the first post) "4- Run DiagBox 8.01 installation (it will uninstall v7.xx first) until it requests Activation. Close it (X) and run the tool "AWRoot_v7_Conf+Ativation_v8.exe" it will copy configuration from "C:\AWRoot7\.." and inject the necessary files. 5- Run DiagBox again, it should continue the installation successfully." I get again screen with message: "It is necessary to activate application... " i have done everything as described in video file in the first post and I tried installation process few times but all the time i get the same result. What can be reason why AWRoot_v7_Conf+Ativation_v8.exe can't activate application? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
diagbox 9.173 | sharawi | 2 | 158 |
21-04-2024, 14:31 PM Last Post: justdiag |
|
PSA Diagbox VCI Interfaces | alexturbo | 18 | 6,815 |
27-12-2023, 21:45 PM Last Post: apol |
|
DIAGBOX 2021 9.85 FULL INSTALATION | akli | 6 | 2,754 |
26-12-2023, 20:21 PM Last Post: Le-Mans |
|
DIAGBOX online | walczaklu | 10 | 8,697 |
03-12-2023, 12:57 PM Last Post: mattydr67 |
|
DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) | Simple | 33 | 35,634 |
22-11-2023, 06:16 AM Last Post: Jeppo |
|
Diagbox 9.129 activation request | dadoa4 | 4 | 2,442 |
09-11-2023, 09:59 AM Last Post: bovhec |
|
diagbox 9.150 | stasi | 5 | 2,278 |
16-09-2023, 19:41 PM Last Post: stasi |
|
DiagBox Language Change | Simple | 16 | 17,463 |
14-09-2023, 10:01 AM Last Post: żarówka |
|
Citroen C5 2008 electric handbrake calibration and installation procedure | roanoke | 1 | 362 |
07-08-2023, 08:23 AM Last Post: michalez |
|
DIAGBOX help needed installing | mars2moon | 4 | 1,045 |
23-07-2023, 18:45 PM Last Post: J415UNNY |
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content