[Bimmer540]

Is it possible to use ISTA P Loader V4.6 with K+DCAN and adapter cable for motorcycle and program a BMW motorcycle.

[petkowo]

I always use ICOM-A with ICOM-D and it is working with Loader 4.x on motorrad

[Roo]

AFAIK you can't program without ICOM-D as it has a dedicated chip. Simple re-wiring doesn't help.

[HaakonA]

ISTA-D works on the K-Line bikes with a simple hard wired ICOM-D & ICOM A, the IC in the genuine ICOM-D adapts for very old models

[kerekt]

Can u post here please a wire schematic for motorcycle connector to obd connect?
Also Istap-P/Winkfp/ncsexper work on 2015 modells too with DIY cable ?

[autoraedarum]

AFAIK you can't program without ICOM-D as it has a dedicated chip. Simple re-wiring doesn't help.

I have flashed my S1000RR 2010 without ICOM-D sucessfull

[jaramillo]

Can u post here please a wire schematic for motorcycle connector to obd connect?
Also Istap-P/Winkfp/ncsexper work on 2015 modells too with DIY cable ?

You can look here:

http://cartechnology.co.uk/showthread.ph...318&page=2

[petkowo]

Do you know someone how to flash moto with winkfp? with icom A + D? It works with ISTA-P but with winkfp I have always error

[kerekt]

I made DIY icomd , ISTA+ work fine on 2015 S1000R, ISTAP follow tomorrow, i think ncs/kfp not suitable for later bikes, maybe esys... i will try it tomorrow

[KaiO]

K-Line bikes like S1000 RR work with simple hardwired adapter. But on DCAN bikes the electronic inside the ICOM D plug is needed.