[0176.abraham]

Iam Today testing and all good Thank You

[masa52]

Copy on rapidgator

[conexion]

Perfect thank you so much
Have you the SQLiteDBs french ?

[ebswift]

I can't get my K+DCAN cable (INPA compatible) to work. I have set the port to com9 and set the latency timer to 1msec. I checked the obd.ini and com was 9, I even copied that across to ediabas.ini. All I get is fault memory: unknown when trying to read the vehicle information. The cable light comes on when I plug it in, it goes off when I start communicating to it. The cable worked with an OTG cable with Carly.

Do I have the wrong cable or something? I'm new to this and not having it working before makes it hard with no benchmark to work from.

[inspi1981]

Do You have file obd.ini in Win folder?

[ebswift]

It wasn't in the win folder so I copied it in there, I didn't know about that. Also ran OBDSetup.exe and fixed any mismatched registry values. I checked with Carly again and the cable is still working, it hasn't developed a bent pin or anything. I haven't installed or tried ISTA-P yet.

Happy to start a new thread if that is preferred since this might not be so simple.

[shaggyshadow]

Hi guys!

I have small problem with unpack, can somebody please upload for me files :

Ista-P\BMW\services\data\ecudata\psdzdata\swe\swfl\swfl_00002219.bin.003_003_001
Ista-P\BMW\services\data\ecudata\psdzdata\swe\swfl\swfl_00002723.bin.002_032_018

Thank you

[spaws]

Perfect thank you so much
Have you the SQLiteDBs ita

[koziol]

Can I use ISTA-P loader v4.7 with this from here
http://cartechnology.co.uk/showthread.php?tid=8820

[Select25]

You can use the 4.6 or the 4.7 loader
Works Perfect.