Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bench flashing
|
14-03-2016, 17:48 PM,
Post: #1
|
|||
|
|||
Bench flashing
Hi, i need some help flashing msv80 on the table with winkfp.
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
15-03-2016, 19:18 PM,
Post: #2
|
|||
|
|||
|
RE: Bench flashing
Im also interested how to do that
|
|||
|
|
|
18-03-2016, 16:18 PM,
Post: #3
|
|||
|
|||
|
RE: Bench flashing
Get can bridge if you want simple achievement or can adapter to manually send wakeup signal to the dme . In general any ecu has can low / can high connectors and power connectors .
I do tons of flashing / coding on bench using can bridge. |
|||
|
|
|
19-03-2016, 09:48 AM,
Post: #4
|
|||
|
|||
|
RE: Bench flashing
I have made myself female OBD connectors with pins to connect to the ECU and external power supply. AVDI has 120 ohm resistors built-in, other interfaces will need external resistors(if not pair, at least 1).
You can use the same connection diagram for MSV7x/8x and MSD8x. |
|||
|
|
|
19-03-2016, 14:52 PM,
Post: #5
|
|||
|
|||
|
RE: Bench flashing
Ok
so if I wona flash it on bench using K+DCAN device what is procedure to connect 120ohm resistor sorry for stupid question |
|||
|
|
|
19-03-2016, 20:44 PM,
Post: #6
|
|||
|
|||
|
RE: Bench flashing
The resistor must be connected between CAN L and CAN H, preferably closer to the ECU end. Ideally 2 close to both ends.
|
|||
| Reputation: +2 - koziol [+1] , KEEEN [+1] | |||
|
|
|
20-03-2016, 16:55 PM,
Post: #7
|
|||
|
|||
|
RE: Bench flashing
Thank you bawareca,
all is working good i am able to program on the table with autohex2. with winkfp i always get error messages , need help to program with winkfp. thanks |
|||
|
|
|
20-03-2016, 19:24 PM,
Post: #8
|
|||
|
|||
|
RE: Bench flashing
I have done many modules with Winkfp on the bench this way. Check your data and K+DCAN functionality.
|
|||
|
|
|
17-02-2017, 11:38 AM,
Post: #9
|
|||
|
|||
|
RE: Bench flashing
Please recommend a good can bridge to connect E and F series cic and nbt for flashing on a table.
Thanks Setubal-Portugal
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| MGU Bench connection | kimz | 4 | 420 |
22-04-2024, 17:06 PM Last Post: kimz |
|
| Flashing hybrid cars with E-sys | ravager | 0 | 145 |
18-04-2024, 09:51 AM Last Post: ravager |
|
| Test bench Connection to CAN ECU's | HaakonA | 3 | 312 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
|
Tool for bench read 8hp | Garryq | 9 | 1,668 |
26-03-2024, 09:32 AM Last Post: skywoker |
| Bosch MEVD172H bench backup | mrproper | 1 | 278 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
| Flashing a stock box map to an E60 with XHP? | GoNz0- | 10 | 404 |
20-03-2024, 09:33 AM Last Post: tomaxsas |
|
|
|
flashing modules hw-id | redog4dy | 5 | 351 |
04-03-2024, 13:26 PM Last Post: redog4dy |
| Power supply for coding flashing | kklobo | 14 | 968 |
29-02-2024, 08:37 AM Last Post: nBlacky |
|
|
|
ENAV2 bench activation | Airbus | 10 | 956 |
25-02-2024, 08:17 AM Last Post: jb2005 |
| Motronic 3.3.1 bench | jaramillo | 3 | 214 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
