Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Problems reading E series ISTA+
17-03-2016, 12:10 PM,
Post: #1
|
|||
|
|||
Problems reading E series ISTA+
Hello, Greetings to all Members
We have problems reading older E series cars with round socket. We can't access the car, no car recognition, nothing . We have ICOM A2 firmware 140 and ISTA + v. 3.54.12 (from 02.2016). The system works perfect with newer cars using 16pin OBD socket, E series and F series. We are wondering if other members have the same problem. Is it the latest ISTA software issue ? Before we had no problems like this with the older ISTA software. Please comment on the above. Cheers |
|||
17-03-2016, 12:16 PM,
Post: #2
|
|||
|
|||
RE: Problems reading E series ISTA+
Hello
Try this one put 7 last characters of vin manually then start diagnose Best Regards |
|||
17-03-2016, 13:41 PM,
Post: #3
|
|||
|
|||
RE: Problems reading E series ISTA+
Yes, I have seen this too.
Manual identification with VIN seems to work instead. |
|||
17-03-2016, 17:52 PM,
Post: #4
|
|||
|
|||
RE: Problems reading E series ISTA+
Hi, thanks for the informtion. I did exactly this immeduiately after ISTA did not recognized E46. It started the test, but then after a long time stopped.... Then I used my old GT1 system on that car and all went OK. So, it was not car issue. Any more ideas, plz.
|
|||
17-03-2016, 18:33 PM,
Post: #5
|
|||
|
|||
RE: Problems reading E series ISTA+
Hi
For probleme with old serie with icom, look the link. |