[bmwddh]

The same to me ,i use win7 x86 system
the warning is : the connection to one of the required databases could not be established. Please check DSS#00046632EN for further trouble shooting
can you help me ! thanks a lot

[KaiO]

Unblock SQLdatabases before running.

[CarT01]

I dont have a unblock button at windows 10.


Gesendet von iPhone mit Tapatalk

[Enoch]

Does anyone know why the operations report and the test plan screen would be blank. Thanks

[Polo08816]

So I think my problem is related to unblocking the files prior to extracting them. However I don't have an unblock button when I go to properties in Windows 10. Anyone else have this probem? Or is the problem I'm using windows 10?

im having the same issue were you able to resolve?

Simple solution to avoid blocking issues. Actually make a Mega account and use the desktop MegaSync client to download the files after importing them to your Mega account. The files will not be blocked when downloaded that way. Or you can also use a prebuilt Version of ISTA in a VM. PM me for an alpha release of my Virtual Box VM with this build from OP. All these common issues regarding unblocking and DB errors are resolved in my prebuilt VM.

---

Got an issue running Rcleaner on windows 10 64bit. Always .net exception and it does not work.
Exception message attached.

I always get that issue with RCleaner on Win10 but since I always just replace my old version of Beemerboys's build I don't need to run RCleaner just do the Regfix and it works fine.

---

Base files and update files are only 250 MB ?

You need to add those files to the full sqlDBs for 3.54.12.
Thanks to smallville for his contribution.

Post #6 in the following thread
http://cartechnology.co.uk/showthread.php?tid=13546

This is pretty much the way I went. Built it in a VM. That way I can have friends that aren't that tech savvy just copy the hard disk image.

[Skid1164]

Hi,
I can’t print from this version. With the ISTAGUI.exe.config it has to print on the default printer. For me this does not work , the default printer is set up and operational. I have also tried this, for the print dialog:
ISTAGUI.exe.config:
<Add key = " BMW.Rheingold.CoreFramework.PrintingType " value = "dialog" / >

And changed in the Reg:
HKEY_CURRENT_USER \ Software \ BMWGroup \ ISPI \ Rheingold DEFAULT to DIALOG .

But even without success.

Can someone help me please

Greetings

---

Is this a general problem- or I have to set something else

[M-Simon]

Hi,

it seems that the function fasta data is deactivated in this version. No files will be stored in the fastaOut folder in the Rheingold directory. I am looking for the ISTA diagnostic protocols - ANTFZG files.

How can I enable this again?

Edit: Is it to find here?

<!-- if false, no FASTA data will be generated at all -->
<add key="FASTAEnabled" value="false" />
<add key="BMW.Rheingold.RheingoldSessionController.FileTransfer.BitsProxyPreconfig" value="true" />
<add key="BMW.Rheingold.ISTAGUI.CommandECUFunctionsReadStatus.HandleFASTA" value="false" />
<add key="BMW.Rheingold.RheingoldSessionController.Logic.DoCompressedFASTAUpload" value="true" />

Thank you!

[zsbakos]

Hy,


writes a startup




http://kepfeltoltes.hu/view/160418/ista_...es.hu_.jpg
please help me!

Thx

[BaggieMatt]

I am sure people will help you if only the image wasn't so small

[AutoExe3219]

Hy,
writes a startup

http://kepfeltoltes.hu/view/160418/ista_...es.hu_.jpg
please help me!

Thx

You need to add those files to the full SQLiteDBs for 3.54.12.
Post #6 in the following thread
http://cartechnology.co.uk/showthread.php?tid=13546
download then unpack to your ISTA/D folder\SQLiteDBs\