Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Esys doesn't show CIC possible program update
30-03-2016, 11:01 AM, (This post was last modified: 18-10-2017, 13:54 PM by Clusters.)
Post: #1
Esys doesn't show CIC possible program update
Hello guys ,

lately I've been facing an issue with Esys not showing CIC possible update , I have tried several different cars in the past few weeks , Esys always shows available update to many other modules except the CIC , sometimes it shows only CAFD update even though CIC software version is from factory and never been flashed , still i'm not able to force Esys to flash it . so I think I'm doing something wrong .

   

the above picture is just few minutes ago , CIC and ZGW on bench ,

NBT has no issues , I flashed many on bench and in car , all went perfectly fine .

some technical info : I tried Esys 3.26.1 and 3.27.1 with and without third party launchers ( Esys plus - Esys Launcher ) , using PSDZdata from ISTA P 3.57.xx and 3.58.xx . also tested with Enet as well as ICOM .

any feedback / hint / advise is highly appreciated .

handshake
Quote this message in a reply
04-04-2016, 03:24 AM,
Post: #2
RE: Esys doesn't show CIC possible program update
Update : solved by editing the svt xml , managed to force esys to flash the cic, still same software version but got all the issues sorted out .
Quote this message in a reply
17-04-2016, 20:21 PM,
Post: #3
RE: Esys doesn't show CIC possible program update
As far as I know, last software version for CIC came in i-step 3/2012.
Quote this message in a reply
18-04-2016, 00:34 AM,
Post: #4
RE: Esys doesn't show CIC possible program update
That was my main issue , CIC had some software bug and needed to be flashed again to fix it but esys doesn't find any new update. All good now .[SMILING FACE WITH OPEN MOUTH AND TIGHTLY-CLOSED EYES]
Quote this message in a reply
11-10-2017, 10:18 AM,
Post: #5
XZBMW  RE: Esys doesn't show CIC possible program update
Hey guys,

How do i force a update? What do i must change in ESYS?
Quote this message in a reply
11-10-2017, 17:16 PM,
Post: #6
RE: Esys doesn't show CIC possible program update
Delete all SWFL, IBAD, BTLD, and CAFD files in svt_ist.xml then calculate and svt_soll will see no software and put all software in svt_soll.xml.

So by manipulate svt_ist.xml svt calculation put in same software but like overwrite it smile
Reputation: +1 - syrus [+1]
Quote this message in a reply
[+] 2 users say Thank You to jeroenbmw for this post
18-10-2017, 13:50 PM,
Post: #7
RE: Esys doesn't show CIC possible program update
(11-10-2017, 17:16 PM)jeroenbmw Wrote:  Delete all SWFL, IBAD, BTLD, and CAFD files in svt_ist.xml then calculate and svt_soll will see no software and put all software in svt_soll.xml.

So by manipulate svt_ist.xml svt calculation put in same software but like overwrite it smile

Hello folk!

I have this error when i try to make a svt_soll. I cleaned every swfl, ibad, btld and cafd.

What's wrong?

BG
Nacka


Attached Files Thumbnail(s)
   

If my post deserve it, click thanks and rep please.
Interested in various brands for coding and retrofitting like BMW Group, Daimler Group, VAG-Group, Porsche,
Opel, Toyota, Renault, Range Rover and more.
Quote this message in a reply
21-10-2017, 08:35 AM,
Post: #8
RE: Esys doesn't show CIC possible program update
(18-10-2017, 13:50 PM)Nackapatz Wrote:  
(11-10-2017, 17:16 PM)jeroenbmw Wrote:  Delete all SWFL, IBAD, BTLD, and CAFD files in svt_ist.xml then calculate and svt_soll will see no software and put all software in svt_soll.xml.

So by manipulate svt_ist.xml svt calculation put in same software but like overwrite it smile

Hello folk!

I have this error when i try to make a svt_soll. I cleaned every swfl, ibad, btld and cafd.

What's wrong?

BG
Nacka

Thanks to this thread, I successfully updated my CiC as it was mentioned.
I got the same exact error message. All I did was press ok and then Calculate Tal. Saved the Tal and opened it up with no problem. I was able to see my HU-CIC among other ECU and flashed. It worked for me. I was facing the same issue as you. Hope it works for you.
Quote this message in a reply
26-10-2017, 12:05 PM,
Post: #9
RE: Esys doesn't show CIC possible program update
(21-10-2017, 08:35 AM)milzgatez Wrote:  
(18-10-2017, 13:50 PM)Nackapatz Wrote:  
(11-10-2017, 17:16 PM)jeroenbmw Wrote:  Delete all SWFL, IBAD, BTLD, and CAFD files in svt_ist.xml then calculate and svt_soll will see no software and put all software in svt_soll.xml.

So by manipulate svt_ist.xml svt calculation put in same software but like overwrite it smile

Hello folk!

I have this error when i try to make a svt_soll. I cleaned every swfl, ibad, btld and cafd.

What's wrong?

BG
Nacka

Thanks to this thread, I successfully updated my CiC as it was mentioned.
I got the same exact error message. All I did was press ok and then Calculate Tal. Saved the Tal and opened it up with no problem. I was able to see my HU-CIC among other ECU and flashed. It worked for me. I was facing the same issue as you. Hope it works for you.

It didn't work. After i click OK, the TAL-Calculating stays grey..

What can I do?

BG
Nacka

If my post deserve it, click thanks and rep please.
Interested in various brands for coding and retrofitting like BMW Group, Daimler Group, VAG-Group, Porsche,
Opel, Toyota, Renault, Range Rover and more.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,401 Yesterday, 10:39 AM
Last Post: MINIGP1610
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,730 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW BimmerUtility vs Esys Launchers diagso 555 106,398 26-03-2024, 11:41 AM
Last Post: PeterY
  I020 esys connection issue mcrussell 6 218 25-03-2024, 23:35 PM
Last Post: vanos
  need update & mod VIN from FRM ? ka_rai 7 182 25-03-2024, 01:06 AM
Last Post: armenh7
  MGU G30 retrofit , PDC does not show laso 3 168 24-03-2024, 14:35 PM
Last Post: laso
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,885 24-03-2024, 11:29 AM
Last Post: Twointje
  Looking for a car which has secure coding to program Fx82 0 193 18-03-2024, 22:57 PM
Last Post: Fx82
  GenEsys Creator (New Tool FA ESYS) scorpium59 405 29,267 16-03-2024, 21:08 PM
Last Post: scorpium59
  Sharing PSDZdata files between istaP and ESYS BMWlad 23 9,839 16-03-2024, 18:09 PM
Last Post: kuno24

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content