Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

E60 ccc update went wrong. now just rebooting
01-02-2017, 10:00 AM,
Post: #21
RE: E60 ccc update went wrong. now just rebooting
(01-02-2017, 07:04 AM)Pher0 Wrote:  No success always error unknown ecu adress. I need dump file format expert mode. But cant find this files.

Bummer, unfortunately I don't have a dump sad BMTroubleU
Quote this message in a reply
01-02-2017, 10:50 AM,
Post: #22
RE: E60 ccc update went wrong. now just rebooting
Try by tool32 open prg file for CCC-GW find command: steuern_bootmode_host as argument give VXWORKS_FAST then restart CCC and put recovery CD.
Quote this message in a reply
01-02-2017, 11:08 AM,
Post: #23
RE: E60 ccc update went wrong. now just rebooting
(01-02-2017, 07:04 AM)Pher0 Wrote:  No success always error unknown ecu adress. I need dump file format expert mode. But cant find this files.

True, completely forgot about Tool32. Czozen just reminded. Got from another forum. It helped me once, when my CCC freezed on boot logo.Also try this:

"
Using Tool32.exe I was able to successfully run the "flash_signatur_pruefen" in "CCCA60.prg" module.

Here the steps:
a. Load "49CCA060.prg" in Tool32.exe
b. Go to "??host_bootmode??" (I don't remember the entry exactly but it is near the end). Run using argument "VXWORKS_FAST" (You can see all three options in the "TBOOTMODE" table)
c. After the CCC restarts, load "CCCA60.prg".
d. Run the "flash_signatur_pruefen" with arguments "Programm; 4800" (It takes some seconds to complete)
e. The result should be "OKAY". In the other bootmodes, I get "ERROR_FLASH_SIGNATURE_CHECK".
"
Quote this message in a reply
01-02-2017, 18:31 PM,
Post: #24
RE: E60 ccc update went wrong. now just rebooting
Ok i will give a try
Quote this message in a reply
04-02-2017, 13:03 PM, (This post was last modified: 04-02-2017, 13:04 PM by Pher0.)
Post: #25
RE: E60 ccc update went wrong. now just rebooting
No even without success. I think i have to buy another ccc. that kicks my ass.

If someone has time via teamviewer helping me may be i make it wrong
Quote this message in a reply
04-02-2017, 14:32 PM,
Post: #26
RE: E60 ccc update went wrong. now just rebooting
I tried flashing the GW EEPROM with one file I found on some russian site but with no effect. Everything remained the same. Didn't have time to play with it anymore and/or to flash GW ST10 and 29F400 flash. Looks like this is quite cumberstone problem, hopefully I'll be able to buy a non working CCC so I could play with it a bit more - looks quite interesting but a hard problem biggrin
Quote this message in a reply
04-02-2017, 15:30 PM,
Post: #27
RE: E60 ccc update went wrong. now just rebooting
(31-01-2017, 11:00 AM)JCTI Wrote:  So this screenshot is from a failed flash and/or current state?
I have a E60 CCC HW 12.5 that is rebooting too, the hardware was fixed but now only CCC GW responds others (ASK/ANT/...) don't respond to diagnosis and are RED in ISTA (either P or D). When I run ISTA/P it calculates a measure plan with replacement of the modules, but when I confirm the plan it asks me of old and new numbers, that I don't have ofcourse. Was it the same state with you?

I tried recovery CDs but nothing, also can't seem to find where to create BOOT FILE in ISTA/D.

Any pointers would be greatly appreciated.
I think the numbers are the HW number. Just type the number off the unit twice and see what happens.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW F650gs dme/ecu update Liteace 10 96 10 hours ago
Last Post: HaakonA
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,494 27-03-2024, 10:39 AM
Last Post: MINIGP1610
  need update & mod VIN from FRM ? ka_rai 7 190 25-03-2024, 01:06 AM
Last Post: armenh7
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,909 24-03-2024, 11:29 AM
Last Post: Twointje
XZBMW Update ISTA 4.39.20 SQLiteDBs Italian Language diman64 8 749 09-03-2024, 20:18 PM
Last Post: diman64
XZBMW Update VIN in VCM through esys TIGHTFIN 10 1,158 05-03-2024, 11:26 AM
Last Post: oros
XZBMW Solved ✔ Cic update on E series alsamaraee 16 791 28-02-2024, 11:38 AM
Last Post: alsamaraee
XZBMW Programming_ Changes with xx-xx I level update that are perceptible to the customer shawnsheridan 10 1,926 22-02-2024, 12:17 PM
Last Post: bmchicago
  VCX SE and ISTA D update software of ecus? Maikiu 16 802 21-02-2024, 14:07 PM
Last Post: olifisz
  Update for DDE Pentheus 3 250 09-02-2024, 05:35 AM
Last Post: Stratofortress

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content