[corpus]

Hi everyone, im sharing this info from another forum member

There is a simple way to obtain FSC code for all F models and latest E models, with no need of ICOM to get 1B file.
Latest E and F models have on OBD conector 4 connections to CIC (RX+ , RX- , TX+ and TX-).
Make your own ENET cable using a CAT5 lan cable, a 510-560 ohm resistor and a OBD male plug, or, purchase it online. Only for wires are connected and there is no need to ground anything.

For those models without TX and RX on OBD plug, you will have to make your own connection on the 10 pin plug, in the back of your CIC/CCC unit.

Setup your laptop network card TCP/IPV4 to:
IP: 169.254.199.98
subnet: 255.255.255.0
gateway: 169.254.199.99
DNS does not matter.

You can set your IPV4: control panel / network and sharing center than chose you connection and click properties.

Connect ENET cable to your pc and to your car and turn on ignition (ACC).
Use internet explorer and goto ftp://169.254.199.99. Chrome or other browser were reported to be not so good as IE.

If user and password is asked:
user: root
Password : cic0803 or Hm83stN

go to root
click on directory HBpersistence
click on directory normal
click on file generalPersistencyData_DiagnosticSWTController and save it.

Download a Hex editor (for instance HXD) and install.
Open the file you have downloaded from CIC with HxD and set HxD to HEX mode.
Seach on file for 01 01 00 1B
Highlight and delete eveything prior to 01 01 00 1B
On line 130 delete last block (last 2 entries) and everything after it.
Save file as "a.hex". You will get an exactly 319 bytes file.

Downlods fsc tools. The only thing required is FSC.EXE and FSC.BAT. Edit fsc.bat file in order to input your map region and year.
Map region and year are obtained from map info on last install usb. Use Hxd to read it.

For WEST Europe you will see 0028 0008 on 2016-1 premium map.
0028 is west europe followed by year (0008 is 2016, 0007 is 2015,....).

You can generate a FSC code using on your fcs.bat file 0x28 0x08 (2016-1 premium west europe map)
If you want to generate a lifetime code, use:
0x28 0XFF and change this on fsc.bat.

Your FSC.BAT will look like this:

ECHO OFF
CLS
IF NOT EXIST fsc.exe ECHO File fsc.exe NOT FOUND !
IF NOT EXIST a.hex ECHO a.hex does NOT EXIST !
fsc a.hex 0x28 0xFF > code.txt

IF %ERRORLEVEL% EQU 0 ECHO File code.txt was created successfuly!
PAUSE

Other regions are obtained from map info.
0xFF generates a lifetime code.

Make sure that fcs.bat, fcs.exe and a.hex are together and run fcs.bat.
If everything is in order, you will get a code.txt. file with your code.

Do not sell this information. SHARE IT as it is the spirit of CARTECHNOLOGY

Enjoy

[Roo]

I'd say there's nothing new in this topic.
Simple concatenation of "howto connect via FTP" and "howto extract 1b/generate fsc" topics.
I prefer using dedicated tools which allow doing all this routine in 1-2 clicks.

[corpus]

I'd say there's nothing new in this topic.
Simple concatenation of "howto connect via FTP" and "howto extract 1b/generate fsc" topics.
I prefer using dedicated tools which allow doing all this routine in 1-2 clicks.

Why? why? why? I don't understand why ? What's with negativity with these forum members? This info Is to be sharing for those who it will Benefit

[Schmidti]

Don't forget the last digit from the new CIC Password
After the "N" comes ")"

[stmilosh]

I'd say there's nothing new in this topic.
Simple concatenation of "howto connect via FTP" and "howto extract 1b/generate fsc" topics.
I prefer using dedicated tools which allow doing all this routine in 1-2 clicks.

I am not aware of the tool that extracts 1b file via ENET for Exx series in 1 click (actually I am not aware of any tool that can extract 1b file for Exx series not using ICOM). Please enlighten us!