Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Chevrolet Matiz HC05 X-prog
10-04-2016, 16:02 PM,
Post: #11
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
I read upa dash Matiz. You have to cut Vcc, to read and write need external power supply.
|
|||
10-04-2016, 16:10 PM,
Post: #12
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
|
|||
10-04-2016, 16:11 PM,
Post: #13
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
10-04-2016, 19:03 PM,
(This post was last modified: 10-04-2016, 19:50 PM by Dash_Burner.)
Post: #14
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
(10-04-2016, 16:02 PM)darek_naprawa Wrote: I read upa dash Matiz. You have to cut Vcc, to read and write need external power supply. which pin is vcc ? what do i have to cut ? i feel confused (10-04-2016, 19:03 PM)Dash_Burner Wrote:(10-04-2016, 16:02 PM)darek_naprawa Wrote: I read upa dash Matiz. You have to cut Vcc, to read and write need external power supply. i receive this in pic and i dont understand whats going on |
|||
10-04-2016, 20:28 PM,
Post: #15
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
Vcc-Vdd-5v.
You must move the jumper J2 on the external power supply. |
|||
10-04-2016, 20:35 PM,
Post: #16
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
|
|||
10-04-2016, 21:33 PM,
Post: #17
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
Connection look ok ..
please lift pin 46 (PB3) from mcu and set oscillator 4194 mhz should read BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
11-04-2016, 20:15 PM,
Post: #18
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
Finally i find solution last night. Problem solved Thanks to all for your help. I return help with a pic that maybe will help someone in the future.
|
|||
04-05-2017, 08:59 AM,
Post: #19
|
|||
|
|||
RE: Chevrolet Matiz HC05 X-prog
Thanks Dash_Burner, your work helped a lot, but i have to specify something else , as i had the same problem and played around, reading through forums, this mcu with the original upa of elrasoft should read at 4000 khz oscillator , but with the clone one you must read it with 4194 khz, and by the way, the info of lifting the pin 8-9-10 of mcu from the board was right after that connecting the 5v of pin 9 of upa
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content