[Red_bean_bun]

How did went ?

All good ?

I will be attempting this flash today or tomorrow. I'm new to flashing but I have been studying the steps involved these last few days and I am fairly confident that I know what needs to be done to make it work.

A few questions: I have psdzdata 62.4 lite installed. Can I just extract the relevant SWFL *.xml and *.bin file from 62.4 full? (my coding/flashing laptop does not have enough space for full psdzdata).

I imagine I only need swDeploy and cdDeploy? Not flashing bootloader so blFlash not needed and ibaDeploy makes no sense because I don't think there is anything in the HU owner's manual.

Is the procedure the same for GTS power steering (EPS) and GTS rear diff (GHAS) - ie: flash new SWFL?

Any other last minute advice for those familiar with this procedure would be appreciated!

EDIT: It turns out for EPS: BTLD = 25E2, SWFL = 25E3 & 25E4, for both M3/4 and GTS
And similarly for GHAS: BTLD = 1056, SWFL = 1062 & 1063, for both M3/4 and GTS

So if this is true, then how is the GTS GHAS and EPS flash performed? Or is that a FDL coding change instead? So basically this means DCT (EGS4) is the only one that requires flashing of the swfl, correct? Can someone point me into the right direction on how to code GTS settings for GHAS and EPS?