Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW DTC off needed
20-04-2016, 08:11 AM,
Post: #11
|
|||
|
|||
RE: BMW DTC off needed
|
|||
24-04-2016, 08:18 AM,
Post: #12
|
|||
|
|||
RE: BMW DTC off needed
Hello
Volavka,question for you,not so long ago I bought MPPS V16 EU,the same sw version.For your Bmw you chose EDC16C35 K_line Slow /can and after ECU Id data shows you BMW kline fast mode..Can I safely read and write although I chose incorrect of type? And second question, It MUST be 14V or above for safe write through OBD?Its not enough 12.5-13V with battery charger connected? And what does it mean "some ECUs may loose Comms" I am new on this stuff and I want to read and write DDE7 E60 Thankyou for the answers Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
24-04-2016, 08:59 AM,
Post: #13
|
|||
|
|||
RE: BMW DTC off needed
Thanks Mr.Buzzard your solution work like charm as always
@grmsek.damjan i made more than 10 bmw (EDC16C35) with mpps eu clone without Problem .just you need to correct crc before write . because mpps not calc crc and always i use battery charger during reading/writing for safety work BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
24-04-2016, 09:26 AM,
Post: #14
|
|||
|
|||
RE: BMW DTC off needed
Yes, but with good battery charger do not allways achieved 14V or above? Is this important?
Good tuner must always remember by himself to calculate checksum before send the file to customer Thankyou Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
24-04-2016, 11:20 AM,
Post: #15
|
|||
|
|||
RE: BMW DTC off needed
(24-04-2016, 09:26 AM)grmsek.damjan Wrote: Yes, but with good battery charger do nculate cecksumot allways achieved 14V or above? Is this important? why the tuner must to calculate cecksum?...there are cases that only tool calculate ok cecksum...example edc17,denso,etc...so,better to buy a good tool for remapping service |
|||
23-04-2018, 20:43 PM,
Post: #16
|
|||
|
|||
RE: BMW DTC off needed
hi guys,
there is a way to use chipfile browser for edc17 ? Are there available plugins for these ecus ? thanks |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content