[IZGOY]

0x01 Oel Motoroel
0x02 Br_v Bremsbelag vorne
0x03 Brfl Bremsfluessigkeit
0x04 Filt Mikrofilter
0x05 Circulation Filter
0x06 Br_h Bremsbelag hinten
0x07 CSF Dieselpartikelfilter
0x08 Batt Batterie
0x09 VTG Verteilergetriebeoel
0x09 QMV QMV-H-Oel
0x10 ZKrz Zuendkerzen
0x11 Sic Sichtpruefung/Fahrzeug-Check
0x12 Kfl Kuehlfluessigkeit
0x13 H2 H2-Check
0x14 Ueb Uebergabedurchsicht
0x15 Efk Einfahrkontrolle
0x16 DAD Additiv fuer Partikelfilter
0x20 TUV §Fahrzeuguntersuchung
0x21 AU §Abgasuntersuchung
0x23 DKG DK-Getriebeoel
0x0A ZKrz_a Zuendkerzen adaptiv
0x0D NOx_a NOx-Additiv
0x64 Sic_v Sichtpruefung/Fahrzeug-Check verknuepft

12;01;2017;0;120000;1;23856;0x1;2;0x1;0x1;250000;;0x02;0x1;2500;4;","" = Oel+Br_v
13;01;2017;0;120000;1;23856;0x1;3;0x1;0x1;250000;;0x02;0x1;2500;4;0x03;0x1;2500;4;","" = Oel+Br_v+Brfl
14;01;2017;0;120000;1;23856;0x1;4;0x1;0x1;250000;;0x02;0x1;2500;4;0x03;0x1;2500;4;0x06;0x1;2500;4;","")","") = Oel+Br_v+Brfl+Br_h
it works!
I can not understand the format and run time!
The following two arguments!(
argument : ARG_RESTDISTANZ_1
type : long
comment : Restdistanz остаточное расстояние

argument : ARG_RESTZEIT_1
type : unsigned int
comment : Restzeit через какое время(месяц)
)

[Fx82]

Are we talking about this?

[Twoone]

@ Fx86

Yes we talk about that.

@ Izgoy
The following two arguments!
argument : ARG_RESTDISTANZ_1
type : long

argument : ARG_RESTZEIT_1
type : unsigned int

One of the variables you put in the string is if the maintenance was scheduled on Time. If you fill in that for example it was to late done the maintenence simbol shows not green collor but orange, and the amount of kilometers that passed the planned maintenance are shown. and/or time that exeeds the maintenance are shown

[rallyesport]

What is the tool to handle this?

[Twoone]

What is the tool to handle this?

Toolset32

[Fx82]

Which file and job have to be executed?
For which models does this applies?

[Twoone]

Which file and job have to be executed?
For which models does this applies?

Load SGBD File: CIC.prg

Job: steuern_servicehistory_add

I tested on 2012 F30 with CIC.
I think it works for cars that have Servicehistory in coding data of CIC enabled

SERVICE_HISTORY Activ.

If you have this option for electronic service book is depending on the I-level of your car i think.

When i look in NBT.prg the option is also there so i think works also for NBT but never tested myself

[Fx82]

Do you know if this also works for 5 series with cic? (F10 and F11)
I've never seen one which has this.

[Twoone]

Do you know if this also works for 5 series with cic? (F10 and F11)
I've never seen one which has this.

I think it is possible. Just look to codingdata CIC with ESYS and see if it is activated. If not activate and put service history in cic with toolset32

Keep in mind that if the car goes to dealer and the connect it online with BMW server the data synchronizes the data will be lost if you use fake dealernumber.

I don't now if you fill in independent workshop "00000". Maybee the data will stay in cic even if it is synchronised with BMW server

[tonemoz]

Hi,

Has anyone seen or used this tool for service history input?

See attached