Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

W246 errors after can filter
21-04-2016, 00:25 AM,
Post: #1
YTMercedes  W246 errors after can filter
Hello C.T. mates.. hi today I corect milage on B-classe v246 2013 only dash and I installed can filter from codecard..everithing went ok and milage didnt sinc from ezs but after one minute warnings came up on dash(parking brake,esp..)and I cant delite them..what could be wrong?bad emulator from codecard or something else...
Quote this message in a reply
21-04-2016, 10:40 AM,
Post: #2
RE: W246 errors after can filter
Could be bad filter.
try to reset battery of car for minimal 10 minutes.

maybe the 999.999 trick works. (first set to 999.999 to block ezs, then put lower mileage in dash)
Quote this message in a reply
[+] 6 users say Thank You to pietje001 for this post
21-04-2016, 13:49 PM,
Post: #3
RE: W246 errors after can filter
Ok mate but did you test 999.999 on w246?I now for some models iven dp3 do that but I am not sure I can do that on this 2013 car...thanks for respond
Quote this message in a reply
21-04-2016, 14:36 PM,
Post: #4
RE: W246 errors after can filter
i am not sure if it works. you could try.. the worst thing that could happen is that dash stays on 999.999. then you would need a better can blocker to put a lower mileage again. that works anyway. try diagprog cangateway.

(if the ezs has a motorola-processor it defenitly will not work!)
Quote this message in a reply
[+] 4 users say Thank You to pietje001 for this post
05-06-2016, 20:59 PM,
Post: #5
RE: W246 errors after can filter
Use a gecko or one from banny, problem solved wink

Stop getting worried about what could go wrong, and start getting excited about would could go right!

hmmmmmmm........eeprom!!! Digi v4.94, Xtool, R260, R270, Smok, VagProg DataSmart 3+ Smelecom, Autel Maxisys ms908 rofl
Quote this message in a reply
[+] 2 users say Thank You to Dayo for this post
06-06-2016, 05:49 AM,
Post: #6
RE: W246 errors after can filter
Problem was solved with new filter..but funy thing is oem filter from codecard was cosing problems and china copy actualy worked..
Quote this message in a reply
[+] 4 users say Thank You to rs@chip for this post
25-08-2016, 09:59 AM,
Post: #7
W246 errors after can filter
Safer to use speed filters, all locations freeze then and no trace


Sent from my iPhone using Tapatalk

Stop getting worried about what could go wrong, and start getting excited about would could go right!

hmmmmmmm........eeprom!!! Digi v4.94, Xtool, R260, R270, Smok, VagProg DataSmart 3+ Smelecom, Autel Maxisys ms908 rofl
Quote this message in a reply
31-10-2017, 10:50 AM,
Post: #8
RE: W246 errors after can filter
I also used Yanhua Can filter on W246. After 2 weeks i got many errors ABS, ESP, Brake.

Now i removed it.

Where to get high quality can filter for good price ?
Quote this message in a reply
31-10-2017, 16:19 PM, (This post was last modified: 31-10-2017, 16:19 PM by rs@chip.)
Post: #9
RE: W246 errors after can filter
(31-10-2017, 10:50 AM)dodo34 Wrote:  I also used Yanhua Can filter on W246. After 2 weeks i got many errors ABS, ESP, Brake.

Now i removed it.

Where to get high quality can filter for good price ?

yes lot of problems with those filters after battery disconect...etc etc...I find out those copy from codecard are best for cheap solution
Quote this message in a reply
31-10-2017, 19:57 PM,
Post: #10
RE: W246 errors after can filter
(31-10-2017, 16:19 PM)alex.eobd2 Wrote:  
(31-10-2017, 10:50 AM)dodo34 Wrote:  I also used Yanhua Can filter on W246. After 2 weeks i got many errors ABS, ESP, Brake.

Now i removed it.

Where to get high quality can filter for good price ?

yes lot of problems with those filters after battery disconect...etc etc...I find out those copy from codecard are best for cheap solution

You mean Yanhua CAN Filter has often problem ?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
YTMercedes w447 dash & can filter JaVlk 10 583 09-04-2024, 08:47 AM
Last Post: JaVlk
  Mercedes w246 odo konradzd 2 127 20-02-2024, 14:21 PM
Last Post: konradzd
ZTAudi need km filter audi a3 2015 damire 0 286 24-08-2023, 12:59 PM
Last Post: damire
XZBMW BMW G01 x3 2018 install can filter volavka 10 1,806 30-05-2023, 21:12 PM
Last Post: bimerde
  mercedes w246 odo mercis 1 586 14-09-2022, 10:23 AM
Last Post: Clusters
YTMercedes Mercedes FBS4 how to change or filter the vin number ? Speed2134 4 1,198 11-07-2022, 05:01 AM
Last Post: Speed2134
  W246 change mileage sokisoki3 3 746 08-07-2022, 19:21 PM
Last Post: Renoir
XZBMW cas4 remove can filter Razgul 2 631 08-10-2019, 17:29 PM
Last Post: Razgul
  w246 odo calibrate robiukaz1 2 487 16-08-2019, 21:35 PM
Last Post: Poma
XZBMW Gecko CAN Filter problem with K1600GS Dash Vojno 1 859 21-04-2018, 09:55 AM
Last Post: rs@chip

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content