[tutuianu_daniel]

After trying to update a CHAMP navigation maps from Move 2011 to Move 2016-2 I receive the message and even if the USB is in the glove box nothing happens.

Did you encounter this problem ?
Thanks

[Fx82]

Possibly the fsc is missing. You can check that with e-sys for f models or fstool for e-models.
Is the unit a 8gb or 16gb model?

[tutuianu_daniel]

First time when I inserted the USB it request me the FSC code.
I entered the code.
No error message.
Starting showing 0.0% progress bar.
Strange behaviour, because automatically redirected multiple times to home menu even if I pressed the navigation button each time.
I pull out the USB to format and copy again the maps on USB drive.
Now I receive that error.

I tried with another USB drive -> the same.
I tried with Move 2014 -> the same.

I looked in E-sys for FSC status and for Appl. ID 27 (0x1B) it says Accepted and for the Appl. ID 136 (0x88) it says Loaded. I've tried which "Check FSC" on Appl. ID 136, it swich to Accepted but nothing happends with the USB drive in.

It's a F10. I don't know if has 8Gb or 16GB. How can I find out ?

[mall]

You have to put usb and drive, then you will see how progress bar is going on till 100%

Enviado desde mi GT-I9505 mediante Tapatalk

[Jynkky]

You have to put usb and drive, then you will see how progress bar is going on till 100%

Enviado desde mi GT-I9505 mediante Tapatalk

yes, with business navigation you have to DRIVE your car entire whole update.
i dont know what engineers have think on table with winebottles when they have do it that way

[tutuianu_daniel]

I will try this way, but at least should recognize the USB without driving.

---

someone told that steuern_kartenupdate_usb with argument 1 from tool32 should disable the driving condition

---

name : STEUERN_KARTENUPDATE_USB
comment : Update der Kartendaten für die Navigation über USB

argument : ARG_KARTENUPDATE
type : unsigned char
comment : 0 = Kartenupdate mit USB ab 10 km/h möglich
1 = Kartenupdate im Stillstand mit USB möglich

[ixot]

   

Hi.

I have same problem (F10.)
The problem gradually higher
map update unsuccessful.
show same fault screen.. must be reconnected again usb device....
map update process after champ2 dead


I try reprogramming Ista p. programming success.. coding not possible...
Ista d show.. champ2 not respons

I have champ2 brick

[gfriedrichi]

Hi.

I have same problem (F10.)
The problem gradually higher
map update unsuccessful.
show same fault screen.. must be reconnected again usb device....
map update process after champ2 dead


I try reprogramming Ista p. programming success.. coding not possible...
Ista d show.. champ2 not respons

I have champ2 brick

Hi friend,
Lcd now is totally blue ?
When you read svt it shows a triangule in hu_cic ?
You just need to flash ecu...i did it before

[ixot]

Hi.

I have same problem (F10.)
The problem gradually higher
map update unsuccessful.
show same fault screen.. must be reconnected again usb device....
map update process after champ2 dead


I try reprogramming Ista p. programming success.. coding not possible...
Ista d show.. champ2 not respons

I have champ2 brick

Hi friend,
Lcd now is totally blue ?
When you read svt it shows a triangule in hu_cic ?
You just need to flash ecu...i did it before

Hi.

Yes.. black screen.. no picture.. no sound.. ecu not response...
Before programming the same..
no picture
There is no sound

[milkyway]

Hello!

Is the Champ reachable in E-Sys by read ECU?

CU Oliver