Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How coding mirror folding from BMW F01 FACELIFT
03-05-2016, 00:43 AM,
Post: #1
|
|||
|
|||
How coding mirror folding from BMW F01 FACELIFT
Can someone explain to me how coding mirror folding from BMW F01 FACELIFT (With E-Sys).
Thank you. |
|||
03-05-2016, 06:02 AM,
Post: #2
|
|||
|
|||
RE: How coding mirror folding from BMW F01 FACELIFT
CAS / KOMFORTSCHLIESSUNG_FB = aktiv
CAS / KOMFORTSCHLIESSUNG_PA = aktiv You also need to code this one: FRM / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = aktiv |
|||
03-05-2016, 11:42 AM,
Post: #3
|
|||
|
|||
RE: How coding mirror folding from BMW F01 FACELIFT
Thank you for the details.
|
|||
04-05-2016, 20:22 PM,
Post: #4
|
|||
|
|||
RE: How coding mirror folding from BMW F01 FACELIFT
Today I tried login with E-Sys, but I can't see the 3 lines what you mention.
What I did: 1:> Start E-Sys (With Launcher Premium). 2:> Connecting with the car. 3:> Expert mode, Coding. 4:> Read FA, Read VCM, Activitate FA. 5:> Menu CAS, Select the one who is green blinking, edit. A folder comming out I expand it. I see a lot of text but nothing with "KOMFORTSCHLIESSUNG_FB", "KOMFORTSCHLIESSUNG_PA"? When I login with ISTA-D on my car and I do a test. I see a lot of green square modules with names, can someone send me a pdf with al this modules so that i can see what each module doing. Example: ICM, HUH..... So sorry i'm new and i'm interesting. Thank you. |
|||
04-05-2016, 21:32 PM,
(This post was last modified: 04-05-2016, 21:56 PM by fabulous.)
Post: #5
|
|||
|
|||
RE: How coding mirror folding from BMW F01 FACELIFT
NOTE : TURN OFF - FIREWALL - VIRUS PROTECTION - INTERNET
1:> Connect with the car 2:> Start E-Sys (With Launcher Premium) connecting with your car brand 3:> Expert mode, Coding 4:> Read FA 5:> Activate FA (left click on FA then activate FA) 6:> Read ecu ( on right) 7:> Scroll down to ecu (CAS) left click on CAFD with the green dot then (READ CODING DATA) (close popup box when finish) which will open up a CAFD folder 8:> click ON the CAFD folder to MAKE CAFD file insde visible 9:> Left click on CAFD file then edit FDL to start search to make changes 10:>Afer changes have been made click on the save icon (disket picture on top)then click back button 11:>Code FDL ( close popup box when finish) SIDE MIRROR CLOSING WITH KEYFOB / COMFORT ACCESS FRM -> 3020 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> aktiv -> Werte=01 CAS -> 3003 -> KOMFORTSCHLIESSUNG_FB -> activ -> Werte=01 CAS -> 3003 -> KOMFORTSCHLIESSUNG_PA -> activ -> Werte=01 if you don't want a delay in closing, you also need to code this: CAS->3003 FH MASTER->KMFRT_SCHLIESSEN->Werte=00 GOOD LUCK |