Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

How coding mirror folding from BMW F01 FACELIFT
05-05-2016, 10:46 AM, (This post was last modified: 05-05-2016, 11:25 AM by fabulous.)
Post: #11
RE: How coding mirror folding from BMW F01 FACELIFT
(05-05-2016, 09:06 AM)BMWLorenz Wrote:  Today I tried again.

I have followed every step.
But when I change de Werte from "00" to "01" bij "aktiv" and than save. I see werte is still "00".

When I put it on "night aktiv" then I see Werte going to "01".
I can not change Werte=00 to Werte=01 by aktiv.

When I saved it go back and than I do CODE FDL, close the popup. Close de E-Sys, Close my car and wait 5 minutes.
When I connect E-Sys, read the CAS then I see nothing is changed its same as before orginal state.

Fabulous:
if you don't want a delay in closing, you also need to code this:
CAS->3003 FH MASTER->KMFRT_SCHLIESSEN->Werte=00

Must I put this to "aktiv" ....... " -> aktiv -> Werte=00"?
Must I put this to "night aktiv" ....... " -> night aktiv -> Werte=00"?

Thank you.


This happen to me during coding also make sure the car engine is on and running when coding because if car is not running with ignition on for a while modules go to sleep. What i did i ran ISTA/D and clear all codes from the car if there are any then i try to code again. If you still having problems update the ECU with the latest psdzdata.

To change Werte=00 Values
Go to page 17 of the PDF (Beginners Guide Coding)POST 15b and 16b.

(05-05-2016, 10:34 AM)BMWLorenz Wrote:  Thank you FX82. Will try it again.

Do you know the following ?

Fabulous wrote:
if you don't want a delay in closing, you also need to code this:
CAS->3003 FH MASTER->KMFRT_SCHLIESSEN->Werte=00

Must I put this to "aktiv" ....... " -> aktiv -> Werte=00"?
Must I put this to "night aktiv" ....... " -> night aktiv -> Werte=00"?


Just change Werte=00 value only


CAS -> 3003 FH MASTER -> KMFRT_SCHLIESSEN
Werte=00 (the default value is Werte=0F)
This results in a much faster folding of the mirrors when comfort closing.
05 for 0.5sec
0A for 1sec
0F for 1.5sec
Quote this message in a reply
[+] 2 users say Thank You to fabulous for this post
05-05-2016, 11:46 AM,
Post: #12
RE: How coding mirror folding from BMW F01 FACELIFT
I have followed all the steps, finally it is change to werte=01, but when I finished with the "Code FDL" and closed the E-Sys, my mirrors don't working anymore.

I connect again to the car, I see everthing is going to
Night aktiv -> Werte= 01

pls need your help.
------
Factory default are the settings by my car:
FRM -> 3020 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> activ -> Werte=01
CAS -> 3003 -> KOMFORTSCHLIESSUNG_FB -> activ -> Werte=00
CAS -> 3003 -> KOMFORTSCHLIESSUNG_PA -> activ -> Werte=00
CAS -> 3003 -> KMFRT_SCHLIESSEN -> activ -> Werte=00


My Mirrors working by factory defaults fine, but I have a delay.
What I want is when i lock my doors with comfort acces/key that the mirrors automatic also closed without delay.
Quote this message in a reply
05-05-2016, 11:55 AM,
Post: #13
RE: How coding mirror folding from BMW F01 FACELIFT
(05-05-2016, 11:46 AM)BMWLorenz Wrote:  I have followed all the steps, finally it is change to werte=01, but when I finished the Code FDL and closed the E-Sys, my mirrors don't working anymore.

I connect again to the car, I see everthing is going to
Night aktiv -> Werte= 01

I don't understand it.

pls need your help.

------
Factory default are the settings by my car:
FRM -> 3020 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> activ -> Werte=01
CAS -> 3003 -> KOMFORTSCHLIESSUNG_FB -> activ -> Werte=00
CAS -> 3003 -> KOMFORTSCHLIESSUNG_PA -> activ -> Werte=00
CAS -> 3003 -> KMFRT_SCHLIESSEN -> activ -> Werte=00

Was there any errors after you complete FDL coding did everything looks like page 15 of PDF STEP 20 AND 21
Quote this message in a reply
05-05-2016, 12:02 PM,
Post: #14
RE: How coding mirror folding from BMW F01 FACELIFT
After Code FDL, No errors, blinking green.
I see it changes only from activ to nigh activ. The Werte I can't change.

last Monday my car get overall update by the dealer. I have the latest update.
Quote this message in a reply
05-05-2016, 12:06 PM,
Post: #15
RE: How coding mirror folding from BMW F01 FACELIFT
(05-05-2016, 12:02 PM)BMWLorenz Wrote:  After Code FDL, No errors, blinking green.
I see it changes only from activ to nigh activ. The Werte I can't change.

last Monday my car get overall update by the dealer. I have the latest update.

Do you have teamViewer on you pc
Quote this message in a reply
05-05-2016, 12:09 PM,
Post: #16
RE: How coding mirror folding from BMW F01 FACELIFT
I will install Teamviewer,
I have internet connection on my car 4G. I will connect my laptop on my car.

My laptop must be charge 30 minutes because it is now 16%.
I will be on my car 14:45 (Netherlands Time)
Quote this message in a reply
05-05-2016, 12:25 PM,
Post: #17
RE: How coding mirror folding from BMW F01 FACELIFT
(05-05-2016, 12:09 PM)BMWLorenz Wrote:  I will install Teamviewer,
I have internet connection on my car 4G. I will connect my laptop on my car.

My laptop must be charge 30 minutes because it is now 16%.
I will be on my car 14:45 (Netherlands Time)

PM me TeamViewer info when ready and run TeamViewer as admin
Quote this message in a reply
[+] 2 users say Thank You to fabulous for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW F10 RHD to LHD coding? morto 10 1,220 Yesterday, 06:57 AM
Last Post: muskatas
XZBMW G15 remember last driving mode & ECO PRO MSA memory coding duss46 7 341 26-03-2024, 18:56 PM
Last Post: duss46
XZBMW coding g12 remote key /m display redog4dy 5 192 26-03-2024, 07:23 AM
Last Post: Siki78
  Some news, secure coding coming to new bikes :/ Node 8 1,012 25-03-2024, 15:13 PM
Last Post: RuleNormaliai
  Need help coding out SOS BMW E60 tigre 8 196 24-03-2024, 21:25 PM
Last Post: jararak
  Engine swap E60 535d --> E61 530d coding advice requested Stratofortress 9 303 23-03-2024, 14:59 PM
Last Post: Simoniak
  BMW E87 swap M5 V10 coding cluster Pedrom92 0 99 20-03-2024, 22:50 PM
Last Post: Pedrom92
XZBMW G20- Higher capacity battery coding hallamnet 2 307 19-03-2024, 07:06 AM
Last Post: MasterGt
  Looking for a car which has secure coding to program Fx82 0 194 18-03-2024, 22:57 PM
Last Post: Fx82
XZBMW coding 2018 bmw bike with ncs expert carlosabh71 11 1,398 16-03-2024, 08:01 AM
Last Post: TheNine90

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content