Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ ISTA-P D-Can => ICOM Emulator connection problem
03-05-2016, 18:11 PM,
Post: #1
ISTA-P D-Can => ICOM Emulator connection problem
Hey,

i tried to figure out how to connect to my car (E-Series e93) using ISTA-P and the D-Can->Icom emulator which is present in BMW ISTA-P Loader V4.6.exe however whenever i try to connect to it its stuck while trying to detect the VIN.
A small ediabas icon turns red in my taskbar which indicates an error i guess ?

So is this some sort of issue with the emulator not using the right com port or am i doing sth else wrong.

The only thread that wouldve solved my issues seems to be deleted.
ISTA-D in Ediabas mode works just fine.

ISTA-P Version 3.58.0.500

Kind regards
Martin
Quote this message in a reply
03-05-2016, 18:28 PM,
Post: #2
RE: ISTA-P D-Can => ICOM Emulator connection problem
Hello Martin,

Try this:

- start ISTA Loader 4.6
- CLICK "Start ICOM Emulator"
- wait a Moment
- go to the ediabas.ini and set TCP IP to 169.254.0.1
- save ediabas.ini
- start ISTA-p and connect to your Car

That needs to be repeated at each start!

This works fine for me and is the only way to connect to my Car.

I hope I could help rofl

best regards
Martin
Quote this message in a reply
[+] 2 users say Thank You to ProUniverse for this post
03-05-2016, 18:35 PM,
Post: #3
RE: ISTA-P D-Can => ICOM Emulator connection problem
Lets see i still get the red icon on ediabas and it shows no sign of connection.
[Image: MpzBOgx.png]
Quote this message in a reply
03-05-2016, 19:25 PM,
Post: #4
XZBMW  RE: ISTA-P D-Can => ICOM Emulator connection problem
Buy a good kable dude!!!
Quote this message in a reply
03-05-2016, 19:28 PM,
Post: #5
RE: ISTA-P D-Can => ICOM Emulator connection problem
Install patched ediabas (do not edit).
Run emulator networktool.exe to create USB connection (169.254.0.8).
Set K+DCAN to com9.
Reputation: +1 - MartinB [+1]
Quote this message in a reply
[+] 3 users say Thank You to beemerboy88 for this post
03-05-2016, 19:33 PM,
Post: #6
RE: ISTA-P D-Can => ICOM Emulator connection problem
(03-05-2016, 19:25 PM)bobdinro Wrote:  Buy a good kable dude!!!

mine are from odbexpert they worked pretty well with ista-d.
Mine are on com4 atm i will relocate them to com9 ty i will edit this post if im done.

€dit
Nope didnt fix it still no connection possible Error code: 10007
I reinstalled patched ediabas and executed the networktool.exe which prompted me to reboot.
How can i verify it created the usb connection ?

Kind regards
Martin
Quote this message in a reply
03-05-2016, 19:46 PM,
Post: #7
!
(03-05-2016, 19:33 PM)MartinB Wrote:  
(03-05-2016, 19:25 PM)bobdinro Wrote:  Buy a good kable dude!!!

mine are from odbexpert they worked pretty well with ista-d.
Mine are on com4 atm i will relocate them to com9 ty i will edit this post if im done.

Kind regards
Martin

instal patched ediabas 7.3.0 and then set usb com 9, use network tool like beemerboy says, use 169.254.0.8 static ip adress to network USB connection
Reputation: +1 - MartinB [+1]
Quote this message in a reply
[+] 2 users say Thank You to bobdinro for this post
03-05-2016, 19:55 PM,
Post: #8
RE: ISTA-P D-Can => ICOM Emulator connection problem
(03-05-2016, 19:46 PM)bobdinro Wrote:  
(03-05-2016, 19:33 PM)MartinB Wrote:  
(03-05-2016, 19:25 PM)bobdinro Wrote:  Buy a good kable dude!!!

mine are from odbexpert they worked pretty well with ista-d.
Mine are on com4 atm i will relocate them to com9 ty i will edit this post if im done.

Kind regards
Martin

instal patched ediabas 7.3.0 and then set usb com 9, use network tool like beemerboy says, use 169.254.0.8 static ip adress to network USB connection

See my edit i did all this where is this network usb connection?
Outch sorry that i wasted your time my static ip was set to .7 not .8

Thanks to all of you guys!
Quote this message in a reply
04-05-2016, 17:20 PM,
Post: #9
RE: ISTA-P D-Can => ICOM Emulator connection problem
Hello!

I need your help if it is possible.
I did istalled ISTA/D and ISTA/P.

ISTA/D working w/o any issue with K+DCAN cable, but ISTA/P
cannot see K+DCAN in Connection Manager.

WIN7
Loader 4.6

Any ideas, suggestions?

Thank you.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista for use whit vcx se db8000 0 13 42 minutes ago
Last Post: db8000
  ista 4.46 Standalone kiranabc 31 2,800 1 hour ago
Last Post: kiranabc
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 278 5 hours ago
Last Post: RaoulK1998
XZBMW Bmw 5,f10 radio problem RobertRexhaj 2 56 Yesterday, 21:36 PM
Last Post: RobertRexhaj
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,264 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 627,303 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,428 Yesterday, 10:39 AM
Last Post: MINIGP1610
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,739 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 119 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 155 26-03-2024, 05:11 AM
Last Post: 2013m5

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content