Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ICOM Wifi connection manual
10-05-2016, 06:42 AM,
Post: #11
RE: ICOM Wifi connection manual
Replacement module 6205 to module compatible with lenovo atheros
Quote this message in a reply
[+] 2 users say Thank You to ferrum for this post
11-05-2016, 17:13 PM, (This post was last modified: 11-05-2016, 17:14 PM by ruben_17non.)
Post: #12
RE: ICOM Wifi connection manual
(10-05-2016, 00:47 AM)Sour Wrote:  
(07-05-2016, 17:17 PM)ruben_17non Wrote:  I use laptop with intel centrino n6205, but i use native NetSH for create AP. Work fine

Hi.

I have x230t with intel centrino n6205, I try config native NetSH but no work.
I enter netsh wlan set hostednetwork mode=allow ssid=ICOMWIFI key=XXXXXX

netsh wlan start hostednetwork

and no work I look Itoolradar and not appear

I run
netsh wlan show hostednetwork

number clients=0
think
of course within the icom also configure the correct parameters, but does not appear.

Any ideas or suggestions?
tears

i have same laptop. same wifi card, for me work fine.
check if name of SSID and passwork is same in laptop and in icom.
passwork need wpa2

(10-05-2016, 06:42 AM)ferrum Wrote:  Replacement module 6205 to module compatible with lenovo atheros

only for curiosity, whats is the best card possible for X230T anyone know?

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Reputation: +1 - Sour [+1]
Quote this message in a reply
[+] 2 users say Thank You to ruben_17non for this post
15-05-2016, 10:20 AM, (This post was last modified: 15-05-2016, 10:51 AM by Sour.)
Post: #13
RE: ICOM Wifi connection manual
(11-05-2016, 17:13 PM)ruben_17non Wrote:  
(10-05-2016, 00:47 AM)Sour Wrote:  
(07-05-2016, 17:17 PM)ruben_17non Wrote:  I use laptop with intel centrino n6205, but i use native NetSH for create AP. Work fine

Hi.

I have x230t with intel centrino n6205, I try config native NetSH but no work.
I enter netsh wlan set hostednetwork mode=allow ssid=ICOMWIFI key=XXXXXX

netsh wlan start hostednetwork

and no work I look Itoolradar and not appear

I run
netsh wlan show hostednetwork

number clients=0
think
of course within the icom also configure the correct parameters, but does not appear.

Any ideas or suggestions?
tears

i have same laptop. same wifi card, for me work fine.
check if name of SSID and passwork is same in laptop and in icom.
passwork need wpa2

(10-05-2016, 06:42 AM)ferrum Wrote:  Replacement module 6205 to module compatible with lenovo atheros

only for curiosity, whats is the best card possible for X230T anyone know?

SOLVED

I enter the properties of the network card n6205,go button "settings", Advanced "tab" move Mode 802.11 b / g, and get to work. drive

Run command line:

netsh wlan set hostednetwork mode=allow ssid=ICOMWIFI key="8 characters"

netsh wlan start hostednetwork
netsh wlan show hostednetwork

number clients=1

itool free pool with RADAR and working with ISTA / D. It seems fine.

Thanks bow ruben_17non

(11-05-2016, 17:13 PM)ruben_17non Wrote:  
(10-05-2016, 06:42 AM)ferrum Wrote:  Replacement module 6205 to module compatible with lenovo atheros

only for curiosity, whats is the best card possible for X230T anyone know?

As I read read

best option a BIOS with whitelist removed.
lenovo must be removed Bios modding

I think it is the best option and install the same bearing the icom Next, inside

Here: downloaddownload

Lenovo whitelist removed
Quote this message in a reply
05-01-2017, 14:35 PM,
Post: #14
RE: ICOM Wifi connection manual
Hello,

i have i thinkpad x201 with a intel n6205 wifi card and windows10.
When i change the properties in the network card, the hotspot only show the connected smartphone and not the icom.
Over a fritzbox the the icom is reachable.
What can i do?
Thanks

Regards Chris
Quote this message in a reply
16-01-2017, 18:05 PM, (This post was last modified: 20-01-2017, 21:56 PM by kuno24.)
Post: #15
RE: ICOM Wifi connection manual
Use fixed IP on ICOM and computer. For examaple ICOM 192.168.68.68, miniport adapter 192.168.68.69 and wired network card 192.168.68.70. For all subnet mask 255.255.255.0. When ICOM connected, don't have 2 connections (wired and WIFI hotspot) at the same time or try use metric http://www.speedguide.net/faq/how-to-tel...efault-350
Quote this message in a reply
17-01-2017, 09:42 AM,
Post: #16
RE: ICOM Wifi connection manual
(08-05-2016, 12:42 PM)fredy3330 Wrote:  FIRST YOU MUST MAKE ICOM WIRELESS. 2 OPTIONS. INTERNAL CARD WITH CHIPSET Atheros AR9160 AND SECOND OPTION EASIER WIFI DONGLE NO MATTER THE BRAND. IT MUST HAVE INSIDE CHIPSET RT5572. FOR EXAMPLE TP-LINK TL-WDN3200 N600 Wireless Dual Band USB Adapter. WITH THE SECOND OPTION YOU DON'T HAVE TO OPEN THE ICOM. JUST PLUG TO USB WAIT FOR THE WLAN LED OF ICOM TO FLASH SOMETIMES AND RESTART ICOM. IN ORDER THE WLAN TO BE ENABLED IN BOTH CASES THE NETWORK CABLE MUST BE DISCONNECTED BEFORE POWERING ON THE ICOM. THEN YOU NEED AN ACCESS POINT YOU CAN DOWNLOAD TO YOUR PC AN APPLICATION LIKE VIRTUAL ROUTER. OR BUY AND CONNECT TO A FREE USB A TINY WIFI DONGLE TO BE ALWAYS CONNECTED TO USB PORT OF YOUR LAPTOP. FOR EXAMPLE TP-LINK TL-WN725N AT THE MAKERS SOFTWARE ENABLE AP MODE. GIVE A NAME TO YOUR AP AND PASSWORD AND THEN WHILE CONNECTED WITH ETHERNET CABLE (ICOM-PC) GO TO ICOM WEB SERVER PAGE AND AT WLAN TAB ENTER THE NAME AND THE PASSWORD OF YOUR AP. IF YOU DECIDE TO INSTALL INTERNAL WIFI CARD AT ICOM A2 INSTALL THE ANTENNAS UNDER THE RUBBER PADS AND NOT INSIDE THE CASE . OTHERWISE YOU WILL HAVE ONLY ABOUT 1 METER RANGE. I MOVED THE ANTENNAS OUT OF THE CASE UNDER THE RUBBER PADS AND IT WORKS FLAWLESSLY AT 6 METERS WITH WIFI DONGLE AS AP AT MY LAPTOP.

And if MOST is needed than what to do with usb?smile
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW E-Sys and direct ecu connection PASS_THRU lacost 2 91 Yesterday, 18:38 PM
Last Post: VroomVroom
  TESTO tool with ICOM Rolzs 5 200 17-03-2024, 20:23 PM
Last Post: Vojno
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 101 34,197 16-03-2024, 12:24 PM
Last Post: hashtagmaster
XZBMW BMW 325I E93 N53 MANUAL ZB NR ZUSB danius375 6 193 06-03-2024, 08:32 AM
Last Post: danius375
  Request xHP 6HP decrypted files and icom flasher tste1982 10 728 05-03-2024, 22:47 PM
Last Post: bradsm87
  Request Retrofit Manual G31 Trailer Hitch BimmerLubuskie 5 124 21-02-2024, 18:14 PM
Last Post: BimmerLubuskie
XZBMW Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA FSCmap 181 50,888 18-02-2024, 20:11 PM
Last Post: Hamsi
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 203 41,152 16-02-2024, 19:32 PM
Last Post: Vojno
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,195 05-02-2024, 23:47 PM
Last Post: vagrom
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 15 3,653 04-02-2024, 11:27 AM
Last Post: CodeDoc

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content