[DashPro]

Hi trying to use st48 digiprog to read 9s12 pad on back of board on 07 lincoln town car anyone know the pattern or how to read ive tried commin l shape with no read happening

[nido1]

You have to add external power supply

regards

[DashPro]

SOLVED

ok I actually was able to solve it by just moving the reset furthur on the board close to mcu at resistor. I will post a picture of how later this week
Thank you thou

[nido1]

Ok friend
but why you gave me reputation 0 when i wanted to help you
regards

[DashPro]

I fixed rep sorry wrong button ...

heres the way todo it
just dont use blue on bdm pad run to resistor by mcu as shown
thanks for helping btw

this works on crown vic and grand marquiz 06 07 as far as ive seen
i got the file from another post and have used it successfully

[nido1]

That is right, in same cases you must pull up reset pin from mcu

[DashPro]

I got lucky there no pulling it up just had to get at it from different spot on that one also if you attempt to read the 06 07 without moving reset you can set airbag light on for some reason