Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Read 080D0WQ failed with R270
03-06-2016, 07:27 AM,
Post: #11
RE: Read 080D0WQ failed with R270
After 20x remove eeprom and put in IC-Socket, the eepom is broken.

I had read that all eeproms M35080 series are compatible?

In the dash was before desolder a 080D0WQ-971776.

Can i use any type of M35080 ?

Which one is write protected and which one not?

Where can i buy some EEPROM?

If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
03-06-2016, 21:40 PM,
Post: #12
RE: Read 080D0WQ failed with R270
Yes it is same family so will work..and by the way try rework your adaptor properly and put smd rezistor instead of 20cm wire + rezistor...I think your problem is in adaptor..
Quote this message in a reply
04-06-2016, 07:10 AM,
Post: #13
RE: Read 080D0WQ failed with R270
(03-06-2016, 21:40 PM)alex.eobd2 Wrote:  Yes it is same family so will work..and by the way try rework your adaptor properly and put smd rezistor instead of 20cm wire + rezistor...I think your problem is in adaptor..

Which one is best and easyest to erase/rewrite?

M35080 6, M35080 3, 080D0WQ?

Is it correct, that i replace the R11 resistor (original 3,6kΩ) by a 1kΩ resistor?
Other rework on the pcb is needed?

If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
04-06-2016, 08:11 AM,
Post: #14
RE: Read 080D0WQ failed with R270
You can't swap 35080 V3 and V6.
All is easy to read/write with quality tool.
Read datasheet for each and find all what you need to know about this eeprom
Quote this message in a reply
[+] 4 users say Thank You to doktorabg for this post
04-06-2016, 09:18 AM,
Post: #15
RE: Read 080D0WQ failed with R270
(04-06-2016, 08:11 AM)doktorabg Wrote:  You can't swap 35080 V3 and V6.
All is easy to read/write with quality tool.
Read datasheet for each and find all what you need to know about this eeprom

Can i swap my 080D0WQ with M35080 V6?
The numbers for example K7376 are not important?

If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
04-06-2016, 10:34 AM,
Post: #16
XZBMW  RE: Read 080D0WQ failed with R270
(04-06-2016, 09:18 AM)bmw335coding Wrote:  
(04-06-2016, 08:11 AM)doktorabg Wrote:  You can't swap 35080 V3 and V6.
All is easy to read/write with quality tool.
Read datasheet for each and find all what you need to know about this eeprom

Can i swap my 080D0WQ with M35080 V6?
The numbers for example K7376 are not important?

Never tried by me.
Read datasheet from both of them and see.
Quote this message in a reply
[+] 2 users say Thank You to doktorabg for this post
04-06-2016, 12:33 PM,
Post: #17
RE: Read 080D0WQ failed with R270
(04-06-2016, 07:10 AM)bmw335coding Wrote:  
(03-06-2016, 21:40 PM)alex.eobd2 Wrote:  Yes it is same family so will work..and by the way try rework your adaptor properly and put smd rezistor instead of 20cm wire + rezistor...I think your problem is in adaptor..

Which one is best and easyest to erase/rewrite?

M35080 6, M35080 3, 080D0WQ?

Is it correct, that i replace the R11 resistor (original 3,6kΩ) by a 1kΩ resistor?
Other rework on the pcb is needed?
my pcb,R8~R11 resistor is 1kΩ
read/write M35080 6, M35080 3, 080D0WQ is no problem.

Press [Image: postbit_reputation.gif] and[Image: Qi7qHzl.jpg], If this post helped you.thankyou
Quote this message in a reply
04-06-2016, 13:35 PM,
Post: #18
RE: Read 080D0WQ failed with R270
(04-06-2016, 12:33 PM)AutoExe3219 Wrote:  
(04-06-2016, 07:10 AM)bmw335coding Wrote:  
(03-06-2016, 21:40 PM)alex.eobd2 Wrote:  Yes it is same family so will work..and by the way try rework your adaptor properly and put smd rezistor instead of 20cm wire + rezistor...I think your problem is in adaptor..

Which one is best and easyest to erase/rewrite?

M35080 6, M35080 3, 080D0WQ?

Is it correct, that i replace the R11 resistor (original 3,6kΩ) by a 1kΩ resistor?
Other rework on the pcb is needed?
my pcb,R8~R11 resistor is 1kΩ
read/write M35080 6, M35080 3, 080D0WQ is no problem.

Today i try another eeprom from dashboard M35080VP. Same problem like the 080D0WQ.

33/1024...

Can you post pictures from your pcb and adapter board?

Soldering is ok now. (sorry but only normal resistors, no smd)

[Image: atrgy9z8.jpg]
[Image: 3p89kviq.jpg]
[Image: 5lhln9ae.jpg]
[Image: hx5e7uv4.jpg]

If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
05-06-2016, 07:52 AM,
Post: #19
RE: Read 080D0WQ failed with R270
Check that you have power to the EEPROM.


Attached Files Thumbnail(s)
   
Quote this message in a reply
05-06-2016, 11:30 AM,
Post: #20
Read 080D0WQ failed with R270
(05-06-2016, 07:52 AM)darek_naprawa Wrote:  Check that you have power to the EEPROM.


Replace with? Or give external 5V to the board while reading?

If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Tool for bench read 8hp Garryq 9 1,573 26-03-2024, 09:32 AM
Last Post: skywoker
  R270 virginise 080D0WQ thecarfixer 9 507 25-03-2024, 19:18 PM
Last Post: armenh7
XZBMW Tool for OBD read / write ZF 8hp TIGHTFIN 7 699 10-03-2024, 07:46 AM
Last Post: syrus
  Entrynav2 FI failed to install FSC pack Pedrom92 7 358 06-03-2024, 22:18 PM
Last Post: Billyjoe69
  F15 Hybrid failed battery pack? willisodhiambo 0 101 26-02-2024, 08:08 AM
Last Post: willisodhiambo
XZBMW BMW X1 U11 Valeo / Magna Transmission read ISN Emmy 0 147 20-02-2024, 15:30 PM
Last Post: Emmy
  Bdc Flash failed at 99% SWFL_0000241a sambir 17 1,339 14-02-2024, 14:00 PM
Last Post: sambir
  Ista mesuring plan failed giando11 2 215 06-02-2024, 08:11 AM
Last Post: Node
  NBT Evo flash failed and v850 clear makes some troubles flashkazama 14 1,178 19-01-2024, 14:59 PM
Last Post: Limespirit
  Key coding e92 Tango, R270 help xMoses 8 362 15-01-2024, 18:36 PM
Last Post: johann74270

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content