[EuroCSL]

Sorry about that I found the complete log if someone can help me look at it please

[KaiO]

I couldn't find any regularity when rolling back error appears. I never use the expert mode, but unfortunately sometimes it rolls back anyway, even without being started in the meanwhile with a clean install.

[beemerboy88]

Sorry about that I found the complete log if someone can help me look at it please

[Node]

Actually there is an error in the log, but its in german:
4/28/2016-8:04 PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Vorhandene Datei unterscheidet sich von redundanter Datenangabe ErrorFileExistsButIsDifferent
And related error in different log file:
28.04.2016 20:04:21,6997921 63494
LOG ERROR: Vorhandene Datei unterscheidet sich von redundanter Datenangabe
Installer : 00000000-0000-0000-0000-000000000000 : 192.168.56.1 : 1
InstallerEngine\Installer\ExecutionPlanCreator.cs : -1
ExecutionPlanCreator::AddElement(
FileElement=BMW/Client/layout/maskcontent/popupAdministration.xml)


Bing translator translates these as: Existing file differs from redundant data specification

So I guess your popupAdministration.xml file was modified and is no longer original. As log ends on that file, it may be that there are others as well.

[bimmer71]

Istap failed to install premature failure , any ideas , I using Rheingold 3.54.30 istap 3.58.2 with loader 4.9 from bimmerboy ?

[Node]

The one and only idea: check the log file.

[simonchs]

I've tried ended prematurely with 2 reasons in the past.
- Windows firewall services, I’ve disabled windows firewall services and the ISTA/P installation ended prematurely. You can turn off windows firewall in control panel but the windows firewall services must be running.
- Modified files in ISTA/P, I’ve copied some old CAFD files into the psdzdata folder of ISTA/P, when I upgrade the ISTA/P, got ended prematurely again. Must be restoring the files to original copy.

[bernd79]

Hello,
Can somebody Tell me, How i Update only one Control Unit? My car is a e61 LCI
In expert Mode i Can remove the hook of the Control Unit but by the measureplan they are again and i can't change it. A few control unit are red , because they not exist in my car from Factory for example cic. What Happens if i accept the measureplan with the Red Control Units in expert mode?