[Marteuk]

As on title. I got everything and its even prewired. I'm trying to enable it using ids but I cant change anything regarding cruise control. it just shows as not applicable. also I retrofitted speedo with trip computer but I cant get outside temperature readings, sensor fitted aswell. There is guy who can activate them for like £60 by editing bcm software. Would like to do this myself, first of all can anyone point where all those backups goes on my computer when I downloading car built data. would it be enough to use notepad to open it and where should I look for these options to appear on ids so I could enable them.

thanks

[min2xx]

Need the same solution

[sev611]

Have you tried elmconfig ? ithink that is a posibility that it could do what you want
sev

[Marteuk]

When opening ids there should be icon on some window as swiss knife, open it and there should be something with programming or updating or special function. when you will open it it will ask to enter the code which is: 60274. after that I think you'll get to programming menu where you can activate cruise, if you retrofit speedo with trip comp, change it as well and I think I should change the speedo to level2 to have outside temperature showing up (if fitted the is somewhere above front drivers wheel). cant remember exactly all the steps. if still not clear just google:60274 IDS I tried this on transiforum.org and they just offered help from some member who asked £40 for this simple activation. when I wrote this step by step these bastards deleted my post.

[doktorabg]

ForScan should make the Job too.

[Raimisklp]

best on these with ucds ori , in some cases with forscan

[koossie]

in th past i used forscan for it on a focus
i would suggest to try that