Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Repair bsi johnson controls
02-06-2016, 20:08 PM,
Post: #11
|
|||
|
|||
RE: Repair bsi johnson controls
Alryt enjoy virgin file below ,if helpfull push thanks and reputation
ONLY THE CURIOUS DISCOVERS THE SECRET BEHIND IT
Quote: |
|||
Reputation: +1 - danielgatan [+1] | |||
02-06-2016, 23:55 PM,
Post: #12
|
|||
|
|||
RE: Repair bsi johnson controls
Most commonly problem on PSA group..lost keys and part of configuration into BSI..orig file is damaged and possible causes are moisture or lost supply (bad accu).
The better way is to read PIN from ECU, after that reconfigure BSI (add VIN, keys, check configuration again) Only if that work doesn't success, than virginize BSI, and so on... Sometime that job goings to be like a nightmare, need to make immo off, and after that can be able to make some changes into configuration...some of BSI accept completely empty eeprom FFFF...there are many ways to fix...and no one is easy. Once again, the easiest way is the first one I'm told u. rgds, cuby |
|||
03-06-2016, 04:29 AM,
Post: #13
|
|||
|
|||
RE: Repair bsi johnson controls
(02-06-2016, 19:59 PM)danielgatan Wrote: How can i check?There are a lot of test to do, in a right order, to see if BSI is it in boot mode and what is the cause for this. For this, you must know PSA cars and Lexia also. Anyway, boot mode is generated by something wrong or missing, and also by a corrupted dump. |
|||
03-06-2016, 04:56 AM,
Post: #14
|
|||
|
|||
RE: Repair bsi johnson controls
(02-06-2016, 17:07 PM)danielgatan Wrote: Hello mates! I want to repair this bsi "if possible" now its dead...car no start ,wipers Hi-code switch from the bsi get removed from the ecu code and define and configure switches |
|||
03-06-2016, 13:34 PM,
Post: #15
|
|||
|
|||
RE: Repair bsi johnson controls
Dont waste ur time get ur pin code for ur ecu and use pp2000/diagbox programme and confique the bsi then add key
ONLY THE CURIOUS DISCOVERS THE SECRET BEHIND IT
Quote: |
|||
03-06-2016, 14:49 PM,
Post: #16
|
|||
|
|||
RE: Repair bsi johnson controls
Not work...i cant add key ...i try it with diagbox and sbb...nothing. I think its better to change bsi...its not easy to repair. today i started the car with immo off.
|
|||
02-08-2016, 10:30 AM,
Post: #17
|
|||
|
|||
RE: Repair bsi johnson controls
|
|||
27-09-2017, 06:56 AM,
Post: #18
|
|||
|
|||
RE: Repair bsi johnson controls
Hello guys
somebody can make this bsi virgin. Bsi johnson control 2012. Thanks in advance |