Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Carprog Rework
05-06-2016, 16:19 PM,
Post: #1
|
|||
|
|||
Carprog Rework
Hi All,
Can anyone help me out with my Carprog, (its a clone) I cannot read security codes or read flash. It does the procedure but the output is all bad. Either no output or repeated characters. I hear it can be fixed but I dont know how. If anyone can help me I will appreciate it greatly. Kind regards |
|||
05-06-2016, 17:14 PM,
Post: #2
|
|||
|
|||
RE: Carprog Rework
(05-06-2016, 16:19 PM)Wildey1771 Wrote: Hi All,What do you read? If I helped,do not forget to press the &
|
|||
05-06-2016, 17:29 PM,
Post: #3
|
|||
|
|||
RE: Carprog Rework
My friend , you are realy out of this job. Let the pro doin this...
Start agriculture job... |
|||
06-06-2016, 00:37 AM,
(This post was last modified: 06-06-2016, 00:44 AM by Wildey1771.)
Post: #4
|
|||
|
|||
RE: Carprog Rework
(05-06-2016, 17:14 PM)rch11 Wrote:(05-06-2016, 16:19 PM)Wildey1771 Wrote: Hi All,What do you read? ME7.6.2 Opel CAN. (05-06-2016, 17:29 PM)Tachonow Wrote: My friend , you are realy out of this job. Let the pro doin this... Mate. if you have nothing to help then dont comment. ty |
|||
06-06-2016, 05:53 AM,
Post: #5
|
|||
|
|||
RE: Carprog Rework
Look on this thread http://cartechnology.co.uk/showthread.ph...ht=carprog
|
|||
07-06-2016, 23:52 PM,
Post: #6
|
|||
|
|||
RE: Carprog Rework
(06-06-2016, 05:53 AM)alex.eobd2 Wrote: Look on this thread http://cartechnology.co.uk/showthread.ph...ht=carprog I'm not fully understanding what I need to do. My current PCB http://imgur.com/a/H7Mbr I dont know what firmware it is on but software I have is 9.31 |
|||
08-06-2016, 01:57 AM,
Post: #7
|
|||
|
|||
RE: Carprog Rework
HI TAEK A LOOK AT THIS
GOOD LUAK |