Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Porsche piwis

  4. MOD FILES

  5. ProCarDiag

  6. ECU CHIPS



Post Reply 
Xhorse vvdi2 tool Technical Support & Feedback
13-04-2017, 21:33 PM
Post: #41
XZBMW RE: Xhorse vvdi2 tool Technical Support & Feedback
Hello,

Can someone tell me how I can use XHORSE multitool the ISN can read / write from the DME to the CAS? For E7X X6


regards
Find all posts by this user
Quote this message in a reply
11-05-2017, 02:30 AM
Post: #42
RE: Xhorse vvdi2 tool Technical Support & Feedback
************************************************************************
*** 2017-05-11
*** Require firmware V4.2.0
************************************************************************
===== Note =====
1. Update firmware v4.2.0 require the latest online update tool v4.2.0 version
2. Please download latest install software first then update firmware

===== VAG V4.2.0 =====
1. New function released: Audi A6L, A7, A8L, Touareg lost all key:
(1). Support ECU with MED17/EDC17 type OR Gearbox with 8 speed CVT type
(2). Require BCM2 data, most of them can read with VVDI2 via OBDII
(3). Require ELV data, you can read with VVDI-PROG
(4). Switch ON igniton with OBDII operation, simple and safe
(5). Collect data from internal-can
(6). Fast calculate speed, only need 1 minute
(7). Freee for all customer with immo5 authorize, every success calculate require 100 remote points
2. Bugfix for immo5 keylearn
3. Bugfix for write A4/Q5/A5 KM
4. Bugfix for read pin and CS from ECU (SIMOS PPD1.1/1.5)
5. Bugfix for flash FRF file
6. Bugfix

===== BMW V4.2.0 =====
1. Bugfix

===== Porsche V4.2.0 =====
1. Bugfix

===== PSA V4.2.0 =====
1. Bugfix

===== Transponder Programmer V4.2.0 =====
1. Support Inida Mahindra special transponder ID46: Xylo, Scorpio
2. Immobilizer data tool: add new for Suzuki swift 2012- 93C86
3. Immobilizer data tool: bugfix for Opel IMMO-2 TMS
4. Immobilizer data tool: bugfix for Brilliance Zunchi 93C64
5. Immobilizer data tool: bugfix for Fiat Marea 93C46
6. Copy Transponder support the latest copy transponder(HITAG2)
7. Bugfix

===== J2534 V4.2.0 =====
1. Bugfix

===== Online Upate Tool V4.2.0 =====
1. Update firmware v4.2.0 require the latest online update tool v4.2.0 version
2. Please download latest install software first then update firmware

===== Quick Start V4.2.0 =====
1. Bugfix
Find all posts by this user
Quote this message in a reply
 Thanks given by: raffy haddad
12-05-2017, 09:56 AM
Post: #43
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hi all
Any one else having problem in prepare remote
Strange symbols ?
Is there a solution ?
Regards
Find all posts by this user
Quote this message in a reply
15-05-2017, 02:11 AM
Post: #44
RE: Xhorse vvdi2 tool Technical Support & Feedback
(12-05-2017 09:56 AM)raffy haddad Wrote:  Hi all
Any one else having problem in prepare remote
Strange symbols ?
Is there a solution ?
Regards
haven't met before,what's remote?
can you upload snapshots about the strange symbols?
Find all posts by this user
Quote this message in a reply
 Thanks given by: raffy haddad
15-05-2017, 05:36 AM
Post: #45
RE: Xhorse vvdi2 tool Technical Support & Feedback
(15-05-2017 02:11 AM)louis21 Wrote:  
(12-05-2017 09:56 AM)raffy haddad Wrote:  Hi all
Any one else having problem in prepare remote
Strange symbols ?
Is there a solution ?
Regards
haven't met before,what's remote?
can you upload snapshots about the strange symbols?
Hi the strange sumbol appear in area and factory windows
The name of brand don't appear don't know what to select to prepare remote to match it to car


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
18-05-2017, 03:11 AM
Post: #46
RE: Xhorse vvdi2 tool Technical Support & Feedback
(15-05-2017 05:36 AM)raffy haddad Wrote:  
(15-05-2017 02:11 AM)louis21 Wrote:  
(12-05-2017 09:56 AM)raffy haddad Wrote:  Hi all
Any one else having problem in prepare remote
Strange symbols ?
Is there a solution ?
Regards
haven't met before,what's remote?
can you upload snapshots about the strange symbols?
Hi the strange sumbol appear in area and factory windows
The name of brand don't appear don't know what to select to prepare remote to match it to car
messy codes,I think you should install it again,or can try in another PC.
Find all posts by this user
Quote this message in a reply
 Thanks given by: raffy haddad
18-05-2017, 05:20 AM
Post: #47
RE: Xhorse vvdi2 tool Technical Support & Feedback
I have installed on 3 different pc the same problem
With your machine do you have the same problem
Find all posts by this user
Quote this message in a reply
22-05-2017, 03:38 AM
Post: #48
RE: Xhorse vvdi2 tool Technical Support & Feedback
(18-05-2017 05:20 AM)raffy haddad Wrote:  I have installed on 3 different pc the same problem
With your machine do you have the same problem
is there virus protection software in PC,if so,close it then install again(with the latest version v4.2.1)
Find all posts by this user
Quote this message in a reply
11-08-2017, 06:21 AM
Post: #49
RE: Xhorse vvdi2 tool Technical Support & Feedback
V4.2.5(2017-08-10)
===== Support software version ====
VAG V4.2.5
BMW V4.2.5
Porsche V4.2.5
PSA V4.2.5
Passthru J2534 V4.2.5
Online Update Tool V4.2.5
Quick Start V4.2.5
You can find the detail update information from Readme in newest software, Mainly include:
1. Add Polish language support
2. Support the latest remote type
3. Support decode kessy for Touareg, Bentley, A8, Cayenne, Phaeton after 2008
4. Bugfix for VW Touareg(IMMO5) lost all key
5. Support read A6/Q7 latest J518(4F0910852B H08 0210) with 9S12DT256 module
6. Improvement for "Lost all key via OBDII"
Find all posts by this user
Quote this message in a reply
16-08-2017, 08:25 AM (This post was last modified: 16-08-2017 15:25 PM by Clusters.)
Post: #50
RE: Xhorse vvdi2 tool Technical Support & Feedback
VVDI2 4.3.0 Software download link:

Rule 3: Do not Post Links on the Board! External links must be attached in a notepad file.

Thanks, Admin

Like this under


Update contents
************************************************************************
*** 2017-08-16
*** Require firmware V4.3.0
************************************************************************
===== VAG V4.3.0 =====
1. Bugfix

===== BMW V4.3.0 =====
1. Add BMW FEM/BDC system key learning, erase key
2. Add BMW FEM/BDC system reset KM
3. Add FEM/BDC syste backup coding, restore coding
4. Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer for help!

===== Porsche V4.3.0 =====
1. Bugfix

===== PSA V4.3.0 =====
1. Bugfix

===== Transponder Programmer V4.3.0 =====
1. Bugfix

===== J2534 V4.3.0 =====
1. Bugfix

===== Online Upate Tool V4.3.0 =====
1. Bugfix

===== Quick Start V4.3.0 =====
1. Bugfix


Attached File(s)
link.txt
File Type: .txt
Downloaded: 6 times
Size: 70 bytes

Find all posts by this user
Quote this message in a reply
 Thanks given by: jokerdiag
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
0Immo VVDI PROG Support/Feedback Thread in Czozen 133 2,231 22-09-2017 14:45 PM
Last Post: bawareca
  FVDI Feedback / questions and answers in klostazy 216 3,129 21-09-2017 14:47 PM
Last Post: eliaselias
0Immo X-100 PRO Key Programming FeedBack in ETPerformance 66 10,403 20-09-2017 18:33 PM
Last Post: mar.wo
XZBMW Best tool for DUMP CAS3+ 0M23s and for CAS4 2014 F26 in ruben_17non 19 1,000 16-09-2017 10:37 AM
Last Post: ruben_17non
XZBMW Autohex II Technical Support & Feedback in volavka 226 40,123 05-09-2017 15:27 PM
Last Post: bryosb
  Smok J-TAG Support/Feedback Thread in volavka 5 1,597 02-09-2017 22:51 PM
Last Post: hafido1983
0Immo Xhorse vvdi key tool ? in volavka 5 984 31-08-2017 18:48 PM
Last Post: cjawahir
0Immo LATEST IMMO SERVICE TOOL 1.2 - 2017 in volavka 148 12,353 21-08-2017 18:10 PM
Last Post: ROD-BENDERS
0Immo Xhorse vvdi BGA MB tool Technical Support & Feedback in volavka 120 23,284 18-08-2017 06:55 AM
Last Post: louis21
XZBMW 2017 BMW FEM/BDC key program: VVDI2 5.0.0 & Yanhua FEM key programmer in JoshuaSQ 2 354 13-08-2017 21:31 PM
Last Post: MTKAutoHex

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content