Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Kess Ktag

  4. MOD FILES

  5. ProCarDiag

  6. ECU CHIPS

  7. NBE Files



Post Reply 
Xhorse vvdi2 tool Technical Support & Feedback
17-01-2018, 09:33 AM
Post: #101
RE: Xhorse vvdi2 tool Technical Support & Feedback
(13-01-2018 11:56 AM)raffy haddad Wrote:  Hi xhorsesupport
I downloaded installer 500 and 501
And whe i use ipgrade kit
Always on file 3 upgrade error failed to upgrade
Please advise
now please try again,I think it works,use the independent Upgrade Kit.not the upgrade kit on the vvdi2,it just has 4.8.0 firmware,should update 5.0.0 firmware
Find all posts by this user
Quote this message in a reply
 Thanks given by: fabulos , raffy haddad
17-01-2018, 13:28 PM (This post was last modified: 17-01-2018 13:49 PM by raffy haddad.)
Post: #102
RE: Xhorse vvdi2 tool Technical Support & Feedback
I will try and update
Regards

Edit : thanks i downloaded upgrade tool and everything is good
Regards
Find all posts by this user
Quote this message in a reply
18-01-2018, 07:03 AM
Post: #103
RE: Xhorse vvdi2 tool Technical Support & Feedback
************************************************************************
*** 2018-01-18
*** Require firmware V5.1.0
************************************************************************
===== VAG V5.1.0 =====
1. Improvement MQB NEC35xx immoblizer/KM function, support following cars:
Audi A3/S3 2014+
Audi Q2
VW Golf7
VW Polo(MQB)
VW Tiguan II
VW Touran II
VW crafter 2017+
VW Passat B8 without virtual cockpit
Skoda Octavia III 2014.07+
Skoda Rapid 2015.06+
Skoda Kodiaq
Skoda Superb III
Seat Ibiza/Ateca/Toledo 2015.06+

Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not included
Attention 2: MQB Immobilizer function support original blank key and MQB key made by VVDI2
Attention 3: part of original blank key not support write data
Attention 4: MQB Immobilizer function require extra license. Customer who have copy 48 (96 bit) license will get MQB license for free
2. Improvement for autodetct in IMMO4 system
3. Add spanish language
4. Bugfix

===== BMW V5.1.0 =====
1. Improvement for read ISN from MSx8x ECU, require VVDI2 database file verison V1.0.0
2. Improvement for load MEV17xx EEPROM dump
3. Support change second hand FEM/BDC ISN and make original key working
4. Add spanish language
5. Bugfix

===== Porsche V5.1.0 =====
1. Add spanish language
2. Bugfix

===== PSA V5.1.0 =====
1. Add spanish language
2. Bugfix

===== Transponder Programmer V5.1.0 =====
1. Bugfix for update remote database
2. Bugfix for save points
3. Immobilizer data tool: bugfix for Fiat Ducato 93C56
4. Add spanish language
5. Bugfix

===== J2534 V5.1.0 =====
1. Add spanish language
2. Bugfix

===== Online Upate Tool V5.1.0 =====
1. Add spanish language
2. Bugfix

===== Quick Start V5.1.0 =====
1. Bugfix


Attached File(s)
VVDI2 5.1.0 SOFTWARE DOWNLOAD LINK.txt
File Type: .txt
Downloaded: 5 times
Size: 216 bytes

Find all posts by this user
Quote this message in a reply
 Thanks given by: slaw1971 , joe06
19-01-2018, 09:24 AM
Post: #104
RE: Xhorse vvdi2 tool Technical Support & Feedback
************************************************************************
*** 2018-01-19
*** Require firmware V5.2.0
************************************************************************
===== VAG V5.2.0 =====
1. Improvement MQB NEC35xx immobilizer/KM function, support following cars:
Audi A3/S3 2014+
Audi Q2
VW Golf7
VW Polo(MQB)
VW Tiguan II
VW Touran II
VW crafter 2017+
VW Passat B8 without virtual cockpit
Skoda Octavia III 2014.07+
Skoda Rapid 2015.06+
Skoda Kodiaq
Skoda Superb III
Seat Ibiza/Ateca/Toledo 2015.06+

Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not include
Attention 2: Improvement for prepare dealer key: support original blank key and MQB key made by VVDI
Attention 3: MQB Immobilizer function require extra license. Customer who have copy 48 (96 bit) license will get MQB license for free
Attention 4: Improvement for key learn function
Attention 5: Bugfix for access some MQB instrument
2. Improvement for autodetct in IMMO4 system
3. Add spanish language
4. Bugfix

===== BMW V5.2.0 =====
1. Improvement for read ISN from MSx8x ECU, require VVDI2 database file verison V1.0.0
2. Improvement for load MEV17xx EEPROM dump
3. Support change second hand FEM/BDC ISN and make original key working
4. Add spanish language
5. Bugfix

===== Porsche V5.2.0 =====
1. Add spanish language
2. Bugfix

===== PSA V5.2.0 =====
1. Add spanish language
2. Bugfix

===== Transponder Programmer V5.2.0 =====
1. Bugfix for update remote database
2. Bugfix for save points
3. Immobilizer data tool: bugfix for Fiat Ducato 93C56
4. Add spanish language
5. Bugfix

===== J2534 V5.2.0 =====
1. Add spanish language
2. Bugfix

===== Online Upate Tool V5.2.0 =====
1. Add spanish language
2. Bugfix

===== Quick Start V5.2.0 =====
1. Bugfix


Attached File(s)
VVDI2 software ver5.2.0 download link.txt
File Type: .txt
Downloaded: 2 times
Size: 214 bytes

Find all posts by this user
Quote this message in a reply
 Thanks given by: joe06
19-01-2018, 13:23 PM
Post: #105
RE: Xhorse vvdi2 tool Technical Support & Feedback
Spanish language does not work, it changes to Polish
Find all posts by this user
Quote this message in a reply
20-01-2018, 08:36 AM
Post: #106
RE: Xhorse vvdi2 tool Technical Support & Feedback
(19-01-2018 13:23 PM)M83 Wrote:  Spanish language does not work, it changes to Polish
yes,the language package is not inside,there is some problem of the translation.it will take some time to revise them then put it into.
Find all posts by this user
Quote this message in a reply
20-01-2018, 10:42 AM
Post: #107
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hello xhorse support
I have vvd2 that in remote program appears strange
Language
And i ve been contacting vvdi shop where i buy it and mr samic
Its been almost a year and a half
Please advise
Regards
Find all posts by this user
Quote this message in a reply
20-01-2018, 12:05 PM (This post was last modified: 20-01-2018 12:06 PM by PierreTheron.)
Post: #108
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hi
VW Amarok
Is it supported for programming keys?

Attached are vvdi2 read files from dash..

(Vehicle was done by dealers now which involved buying a new dash of about 1800 Euros )


Regards


Attached File(s)
Amarok.rar
File Type: .rar
Downloaded: 2 times
Size: 2.2 KB

Find all posts by this user
Quote this message in a reply
 Thanks given by: joe06
Yesterday, 06:34 AM (This post was last modified: Yesterday 06:38 AM by Xhorsesupport.)
Post: #109
RE: Xhorse vvdi2 tool Technical Support & Feedback
************************************************************************
*** 2018-01-23
*** Require firmware V5.2.0
************************************************************************
===== VAG V5.2.1 =====
1. Bugfix for access some MQB(Continental/VDO) instrument
2. Improvement for prepare MQB dealer key: Now we support all original blank key or MQB key made by VVDI
3. Improement for MQB key learning
4. Improvement for autodetct in IMMO4 system
5. Bugfix for spanish language
6. Bugfix


===== BMW V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== Porsche V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== PSA V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== Transponder Programmer V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== J2534 V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== Online Upate Tool V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== Quick Start V5.2.1 =====
1. Bugfix

(20-01-2018 10:42 AM)raffy haddad Wrote:  Hello xhorse support
I have vvd2 that in remote program appears strange
Language
And i ve been contacting vvdi shop where i buy it and mr samic
Its been almost a year and a half
Please advise
Regards
strange language?is that chinese can't display completely,so it seems strange?please send your serial number and your information to me by PM,I change the prepare remote's language section for you,it would be normal after that.


Attached File(s)
VVDI2 software ver5.2.1 download link.txt
File Type: .txt
Downloaded: 2 times
Size: 214 bytes

Find all posts by this user
Quote this message in a reply
 Thanks given by: raffy haddad
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  FVDI Feedback / questions and answers in klostazy 267 17,266 22-01-2018 10:02 AM
Last Post: sqlkarol
0Immo LATEST IMMO SERVICE TOOL 1.2 - 2017 in volavka 207 23,103 21-01-2018 20:58 PM
Last Post: mlulic
YTMercedes 【Feedback】 CGDI PROG BenzMonster key tool support & feedback in obdtool 70 4,810 19-01-2018 22:42 PM
Last Post: perso69
0Immo Xhorse vvdi key tool ? in volavka 13 2,130 19-01-2018 11:16 AM
Last Post: mehrzad_k66
  VVDI2 - free EDC17 and MEV17 authorisation FREE for CT members ;) in daxxer 20 2,146 16-01-2018 16:53 PM
Last Post: vyugovp
  Help to choose right tool in proel123 1 92 15-01-2018 23:09 PM
Last Post: stvesc3
0Immo VVDI PROG Support/Feedback Thread in Czozen 154 9,050 11-01-2018 03:15 AM
Last Post: Xhorsesupport
  Key Master/Key Master DP FEEDBACK in mar.wo 1 136 09-01-2018 12:20 PM
Last Post: mar.wo
0Engine What tool to read dumps in Blinkston 2 147 07-01-2018 20:40 PM
Last Post: 205xad
0Immo IMMO Universal Decoding 4.5 Feedback! in volavka 2 1,109 30-12-2017 23:04 PM
Last Post: hollymay

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content